User Manual
28 Pages
![TABLE OF CONTENTS TABLE OF CONTENTS GROUNDING INSTRUCTIONS... 2 SAFETY INSTRUCTIONS... 3 INSTALLATION... 6 TREADMILL OVERVIEW... 8 OPERATING INSTRUCTIONS FOR CT1... 9 OPERATION SYNOPSIS OF PROGRAMS FOR CT1...21 OPERATING INSTRUCTIONS FOR CT2...24 TFT-LCD SCREEN OPERATION FOR CT2 ...37 OPERATING INSTRUCTIONS FOR PT7/PT10...46 PT-7/10 USB USER MANUAL ...59 MAINTENANCE...61 WARRANTY... 62 1](https://images.bioclinicalservices.com.au/knRDtxdd1CJZMrnCAaJrx8UF/320w/Steelflex%20-%20Steelflex%20Treadmill%20User%20Manual%20Ver%203.png)
Preview
Page 1
INNOVATION
QUALITY
TREADMILL USER MANUAL V.3
DURABILITY
VALUE
TABLE OF CONTENTS
TABLE OF CONTENTS
GROUNDING INSTRUCTIONS... 2 SAFETY INSTRUCTIONS... 3 INSTALLATION... 6 TREADMILL OVERVIEW... 8 OPERATING INSTRUCTIONS FOR CT1... 9 OPERATION SYNOPSIS OF PROGRAMS FOR CT1...21 OPERATING INSTRUCTIONS FOR CT2...24 TFT-LCD SCREEN OPERATION FOR CT2 ...37 OPERATING INSTRUCTIONS FOR PT7/PT10...46 PT-7/10 USB USER MANUAL ...59 MAINTENANCE...61 WARRANTY... 62
1
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
GROUNDING INSTRUCTIONS
GROUNDING INSTRUCTIONS
DANGER-Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product- if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. The appliance must be positioned so that the plug is accessible. If the power cord is damaged; it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a safety hazard.
2
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using the Treadmill.
DANGER - To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: 1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons. 3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacture. 4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Call service for examination and repair. 5. Keep the cord away from heated surfaces. 6. Never drop or insert any object into any opening. 7. Do not use outdoors. 3
plug from outlet. 9. Connect this appliance to a properly grounded outlet only. See Grounding Instructions. 10. Never Tie off Safety Cord, as this will bypass the SAFE use, could cause a choking hazard for children, and / or present
SAFETY INSTRUCTIONS
8. To disconnect, turn all controls to the off position, than remove
other unsafe use of product. Remove and store safety cord and plug after use. Keep out of reach of children. 11. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. 12. Children being supervised not to play with the appliance. 13. WARNING: REMOVE CONTROL BOX (OR KEY, OR SAFETY PIN) WHEN NOT IN USE AND STORE OUT OF REACH OF CHILDREN. AVERTISSEMENT: RETIRER LA CLÉ DE SÉCURITÉ QUAND L´APPAREIL N´EST PAS EN SERVICE, ET LA PLACER HORS D´ATTEINTE DES ENFANTS. 14. CAUTION: RISK OF INJURY TO PERSONS – TO AVOID INJURY, USE EXTREME CAUTION WHEN STEPPING ONTO OR OFF OF A MOVING BELT. READ INSTRUCTION MANUAL BEFORE USING. 15. For commercial use. 4
SAFETY INSTRUCTIONS
PRUDENCE: RISQUE DE BLESSURES - POUR ÉVITER LES BLESSURES, FAIRE PREUVE DE PRUDENCE EXTRÊME LORSQUE L'INTENSIFICATION DANS OU HORS D'UN TAPIS ROULANT. LIRE LES INSTRUCTIONS MANUEL AVANT D'UTILISER 15.CAUTION: To Reduce The Risk Of Injury From Moving Parts - Unplug Before Servicing. ATTENTION: Pour réduire les risques de blessures des pièces en mouvement - Débranchez avant tout entretien. 16.WARNING: To Reduce the Risk of Electric Shock – Unplug Before Cleaning or Servicing. AVERTISSEMENT - Pour réduire le risque de choc électrique le débrancher avant de nettoyer ou de réparer.
SAVE THESE INSTRUCTIONS Figure Grounding methods
GROUNDED OUTLET
GROUNDING PIN
Note:Illustration is for Example purposes only. Your Treadmill plug and required outlet may look different. DO NOT MODIFY plug that comes with treadmill.
5
ELECTRICAL REQUIREMENT Your STEELFLEX treadmill is intended for use in the country to which it was shipped. Electrical supplies outside of this country may differ and may not be compatible with the product. Please consult Customer Support before using the treadmill in a different country.
INSTALLATION
INSTALLATION
LOCATION When choosing a location for the treadmill, pick a location that is unobstructed. The treadmill must have the following clearance.
Non-entry side of treadmill - Minimum of 8 inches (20cm) Entry side of treadmill - Minimum of 36" (90cm) Front of the treadmill - Minimum of 12 inches (30cm) Behind treadmill - Minimum of 6 feet (180cm) These spacing requirements are mandatory for the safe use of the treadmill. If an accident should occur, you must have sufficient space to move away from the treadmill. 6
INSTALATION
GROUNDING INSTRUCTIONS The treadmill must be properly grounded prior to use. Proper grounding reduces the risk of shock or damage to the treadmill. The power cord's plug is equipped with a grounding conductor that must be used with an electrical outlet installed in accordance to all local codes and ordinances. DO NOT use a temporary adapter that bypasses this function. This will stop the safety equipment from functioning properly and may void your warranty. DO NOT MODIFY the plug provided with this product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. LEVELER LEGS After finding a location that is suitable for the treadmill, the rear legs must be adjusted to provide stable support. Located on the side of each leg is a thumb-wheel that will allow you to lower or raise the leg until it is properly seated on the floor. DO NOT adjust legs while the treadmill is on. Turn the power switch to the OFF position before adjustment.
7
POWER SWITCH The power switch is located on the side of the treadmill near the power cord. The power switch has two positions - ON and OFF. The display console will beep when the treadmill is plugged in and the power switch is pressed ON.
TREADMILL OVERVIEW
TREADMILL OVERVIEW
CIRCUIT BREAKER RESET The circuit breaker is located next to the power switch. If there should be an electrical overload due to a surge in electricity or other situation, the circuit breaker will disconnect and attempt to prevent any damage from occurring to the treadmill. If the treadmill suddenly stops with no lights visible nor beep heard, the circuit breaker may need to be reset. To reset the circuit breaker press the button firmly. The display console should restart and a beep should be heard.
CAUTION Feel the power cord with your hands.If the power cord is warm to the touch a problem may exist with the electrical outlet in which the treadmill is plugged. It may be necessary to plug the treadmill into a different outlet.
POWER CORD The power cord of the treadmill must be plugged into a properly grounded electrical outlet. Locate the power cord so it will not come in contact with the wheels of the treadmills during operation. This may cause the power cord to become pinched or damaged . Damage to the power cord could result in a fire hazard or cause personal injury through electrical shock.
8
TFT-LCD SCREEN OPERATION FOR CT2
For PAL system: PICTURE ADJUST
BRIGHTNESS
0 ~ 64
CONTRAST
0 ~ 64
COLOR
0 ~ 64
TINT
0 ~ 32
SHARPNESS
0 ~ 16
EXIT SCREEN ADJUST
H-POSITION
-20 ~ +20
V-POSITION
-16 ~ +16
EXIT TV SETTING
AUTO SEARCH ADD/ERASE
ADD / ERASE
TV SYSTEM
PAL-BG / PAL-DK / PAL-I / SECAM-L
EXIT SETUP
SOURCE
AV / TV / S-VIDEO / MP3
VIDEO SYSTEM
AUTO / NTSC / PAL / SECAM
EXIT FACTORY DEFAULT INFORMATION EXIT
45
Display instruction The display layout for your PT10 & PT7. It includes information windows, matrix window and button location.
Matrix window
OPERATING INSTRUCTIONS FOR PT10 & PT7
OPERATING INSTRUCTIONS FOR PT7/PT10
Information Window Button Location
46
OPERATING INSTRUCTIONS
INFORMATION WINDOW The information window provides user workout data which includes: User workout data TIME
Description Indicates time in minutes and seconds (mm:ss). Indicates heart rate , beats per minute during
HEART RATE
your workout. (Only displayed if you are using contact heart rate bar or chest belt.)
CALORIES
your workout.
INCLINE
Indicates current incline of your workout.
DISTANCE
Indicates distance of workout.
PACE
Indicates time required per mile or kilometer.
SPEED
47
Indicates accumulated calories burned during
Indicates speed of your workout. (Either miles or kilometers.)
The Matrix Window displays the workout program you select. Each program displays a different exercise profile. Flashing lamp bar in the window displays your location on the exercise course. Buttons Location
OPERATING INSTRUCTIONS
Matrix window
There are buttons for operating the machine, adjusting incline level, and adjusting exercise speed. A description of each button is listed below. Start workout
Enter Data
Stop workout slowly
Stop workout
Adjust workout level
Adjust incline level. Every press will increase 1 level. Press and hold the button to adjust quickly. Adjust speed. Every press will decrease 0.1 mile. Press and hole button to adjust in 1.0 increments. 48
OPERATING INSTRUCTIONS
Adjust fan strength. There are three adjustments. off. Low. and High. Fan can be used only when safety key is attached. Choose CLASSIC exercise programs which include CARDIO, FAT BURN, and INTERVAL. Choose Heart rate control exercise programs which include TARGET, HILL, and INTERVAL. MANUAL program. Choose GOAL exercise programs which include TIME, DISTANCE and CALORIES. Choose TRAINING exercise programs which include GERKIN, USB, CUSTOM 1, CUSTOM 2 and CUSTOM 3. REVERSE program which belt runs backward. (Only for PT10) Elevation quick key for 0. Elevation quick key. Level 8 for GEN mode and Level 3 for SIL mode. Elevation quick key. Level 15 for GEN mode and Level 6 for SIL mode. Speed quick key. 2.5 MPH for GEN mode and 1.5 MPH for SIL mode. Speed quick key. 3.5 MPH for GEN mode and 2.5 MPH for SIL mode. Speed quick key. 4.5 MPH for GEN mode and 3.5 MPH for SIL mode.
49
1. PT7 & PT10 are designed for general market(GEN mode) and Rehad/Geriatric market(SIL mode). User can switch modes by following steps.
step 1
OPERATING INSTRUCTIONS
SETTINGS
Remove safety key. Press and hold “
” and “
” for
step 2 3+ seconds. Re-place safety key and press “
” to
step 3 choose GEN or SIL mode.
Keep pressing “
step 4
Press “
”
to go back exercise mode.
”
to choose “MPH” or “KM”, and then press“
”.
Light test scan, and then it
step 5
will go back to exercise mode directly.
50
OPERATING INSTRUCTIONS
2.Date setting step 1
Turn on the treadmill.
step 2
Press “
” hold for 3 seconds.
Set year and adjust by “
” ,then
step 3 press “
”.
Set month and adjust by “
”, then
step 4 press “
”.
Set day and adjust by “
”, then
step 5 press “
”.
Set hour and adjust by “
”, then
step 6 press “
step 7
”.
Set minute and adjust by “ “
”, then press
” to back to exercise window.
Programs
There are different exercise programs, includes MANUAL, CLASSIC, H.R.C, GOAL, TRAINING and REVERSE. Operations are explained as follows. 51
MANUAL
Manual
Turn on the power, Steelflex PT7 or Steelflex PT10 scrolls. Press “
”, the matrix
step 1 window shows 154LBS . User can adjust weight by any “
” and “
or press “
” , then press “
”
” to begin.
Press “ MANUAL ”, and then press “
”.
step 2 Or press “
” to begin.
Note: During workout, user can change speed and incline by using “
” and “
”.
52
GOAL
GOAL
step 1
Set weight by pressing “
step 2
Press “
” or “
” .
”.
Pressing “
” or “
” to set TIME,
step 3 DISTANCE or CALORIES and then press “ Adjust workout time, distance or calories by press step 4 “
step 5
” or “
Press “
”.
”.
Note: During workout, user can change speed and incline by using “
53
” and “
”.
”.
step 1
Set weight by pressing “
step 2
Press “ CLASSIC ” .
Pressing “ step 3
” or “
” or “
” .
CLASSIC
CLASSIC
” to choose
CARDIO, FAT BURN or INTERVAL program and then press “
”.
Adjust workout time by press “
” or
step 4 “
step 5
”.
Press “
”.
Note: During workout, user can change speed and incline by using “
” and “
”.
54
H.R.C.
H.R.C.
step 1
Set weight by pressing “
step 2
Press “
step 3
” or “
”.
”.
Press “
” or “
” to choose TARGET,
HILL or INTERVAL program and then press “
step 4
Press “
” or “
press “
”.
Choose TARGET program
” to set AGE and then
Choose HILL or INTERVAL program SELECT
SELECT
Press “
” or
Press “
“
” to set MAX LEVEL
55
” or
SELECT LEVEL
SELECT LEVEL
step 5
”.
“
” to set LEVEL
H.R.% and then press
workout time, and then
“
press “
” .
” .