Stryker
SDP1000 Technical Tips and Maintenance Document
Document
2 Pages
Preview
Page 1
SDP1000 Technical Tips and Maintenance doc
SDP1000 Digital Color Printer
Oct 15, 2009
Media Replacement Always replace BOTH paper and ribbon as a set and at the same time.
Change the paper and ribbon in the following order:
1
2
Paper Replacement
SEPC-100 : A4 size SWPC-110 : Letter size Remove Media Tray from printer
3
4
Important Note! Never open the media tray or paper eject tray while the printer is initializing (LEDs flashing) or printing. Doing so may lead to equipment failure and possible damage.
Ribbon Replacement Insert the Ribbon end with the IC positioned as shown (6). Verify that the Ribbon is in place and secure before closing the Media Tray.
5
6
7
Page 1
SDP1000
SDP1000 Technical Tips and Maintenance doc
Digital Color Printer
Important Note! Before transportation: -Unplug the power cable only when the power is turned off (Power button LED is off).
If all 4 LEDS are illuminated:
Trouble Shooting
This may have occurred because the Media Tray was opened during initializing (LEDS flashing) or printing.
-Do not unplug the power cable to power off as this may cause damage to the unit.
To clear this error: -Gently push the Media Tray in to close. -Turn off the power, wait a moment then power the unit back on.
-Remove the paper, ribbon before transportation. -Never lift the unit from the cover. -Lift the unit from the bottom as shown.
Page 2