TPS Consoles Ref 5100-xx User Guide Rev F

Contents Software License Notice... 3 Where to Find Answers... 4 Warning, Caution, Note Defined... 4 Important Safety Instructions... 5 System Overview Symbol Definition... 6 Operating Instructions Connecting the Equipment... 7 The Control Screen TPS Start-Up Screen No Handpiece Detected Screen... 8 Functions of the Control Screen Elements of the Control Screen... 9 Select Your System Settings Standard Features ... 10 Quick Reference Guide (Icon Definition)... 11

Handpiece Screens Saw Handpiece Screen (TPS Oscillating and Sagittal Saws)... 12 Rotary Handpiece Screen (TPS Universal and MicroDrills & TPS MicroDriver)... 13 Stryker Endoscopy and Leibinger Handpiece Screen (SE5 hand-controlled Endo Shaver, QuadraCut Shaver, QuadraCut Bone Plug, and QuadraCut Small Joint, Hummer 4, Formula, 6K Micro, 12K Micro)... 14

Other Screens Main Option Screen... 15 System Information Screen... 16 Handpiece Adjustment Screen... 17 Console Adjustment Screen... 18 Footswitch Adjustment Screen... 19 Footswitch Button Mapping Screen... 20 Handpiece Button Mapping Screen... 21 Surgeon Preference Screen... 22 Messages and Error Messages... 23 Specifications... 24 Compliance Statements... 24 Declaration of Conformity... 25 Guidance and Manufacturer's Declarations... 26-28 Repair/Loaner Program Limited Warranty... 29



Software License Notice

Stryker® TPS™ Surgical Tool System products contain software that is installed in the products by Stryker Corporation. Stryker Corporation owns this software; this software is never sold. Each sale of a software containing product is not a sale of such software; it includes only a license to use the software in the product in which the software was initially installed. Any license granted by Stryker Corporation to use the software contained in its; products does not give the licensee the right to copy, alter, disassemble, reverse engineer, create derivative works of such software or to use such software in either original or modified form in any product other than the Stryker Corporation product in which the software was initially installed by Stryker Corporation.

© 2003, Stryker Corporation



Where to Find Answers When you have questions about your Stryker TPS products, there are several places to find the answers.

In this book Use this book to set up your system and select console options. This book also contains information on system safety, repair, and component warranty. ...

In TPS component instructions For answers to questions about any TPS handpiece, attachment, or component , see the information supplied with that component. A copy of TPS Cleaning, Maintenance and Sterilization Recommendations is also supplied with each component. ...

From your Stryker Sales Representative If you can't find an answer in any of the materials provided or you have questions about other Stryker Instruments products, call your Stryker Sales Representative. ...

From Stryker Customer Service Please contact our Customer Service Department to order product information literature, a cutting accessories guide, additional TPS maintenance manuals, and component instructions by dialing 1-800-253-3210. Outside the U.S.A., contact your nearest Stryker subsidiary. ...

See the TPS Cleaning, Maintenance, and Sterilization Recommendations booklet for care information.

Warning • Caution • Note This symbol is used to alert the reader to important safety and precautionary information. When displayed on the actual device, it refers the user to accompanying documents. Please read this manual and follow all instructions carefully. The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed. WARNING:

The personal safety of the patient and/or user may be involved. Disregarding this information could result in injury to the patient and/or operating room staff.

CAUTION:

These instructions point out special service procedures or precautions that must be followed to avoid damaging the instrument.

NOTE:

This provides special information to make maintenance easier or important instructions more clear.



IMPORTANT SAFETY INSTRUCTIONS WARNING: The personal safety of the patient and/or user may be involved. Disregarding this information could result in injury to the patient and/or operating room staff. Read and understand the following warnings.

SYSTEM SAFETY ▪ Prior to each use, operate system components and inspect for damage. DO NOT use if damage is apparent. Take special precautions regarding electromagnetic compatibility (EMC) when using medical electrical equipment like the TPS Console. Install and place the console into service according to the EMC information in this manual. Portable and mobile RF communications equipment, such as wireless phones, can affect the function of the console.

▪ Burs and blades are intended for single use only. ▪ Excessive pressure, such as bending or prying, may cause accessory to bend or break and cause tissue damage to patient and/or operating room staff. ▪ Heavy sideloads and/or long operating periods occasionally will cause overheating of the distal tip and the body of handpieces to the point where the handpiece is uncomfortable to hold or causes injury to the patient.

▪ Use only Stryker approved accessories. Other accessories may result in increased emissions or decreased immunity of the system. Contact your Stryker sales representative for a complete list of accessories. DO NOT modify any accessory. Failure to comply may result in patient and/or operating room staff injury. ▪

▪ If the recommended duty cycle is not followed, the handpiece may overheat and cause injury to patient and/or operating room staff. See the Duty Cycle information supplied with each handpiece.

DO NOT modify ground of power cord.

▪ Excessive pressure, such as bending and/or prying with a bur, may cause the bur to bend or fracture. If operated at a high speed, it is possible that the bur will bend yet further. This could result in damage to tissue in the surgical site, handpiece vibration that causes lost tactile control, or breakage of the bur such that the broken piece would be ejected at a high velocity endangering the patient and/or operating room staff. It is therefore recommended that safety glasses be used.

▪ Equipment not suitable for use in the presence of flammable anesthetic mixture with air or with oxygen or nitrous oxide. ▪ The Stryker Total Performance System is designed to be used by persons familiar with surgical procedures. Misuse may cause injury to both patient and system components. Prior to each use, system components should be inspected for damage. DO NOT use if damage is apparent.

▪ Excessive pressure, such as bending and prying with blade, may cause the blade to bend or fracture and could result in damage to tissue in the surgical site and/or loss of tactile control.

▪ Use only Stryker TPS components and accessories unless otherwise specified. ▪ Clean and sterilize handpieces and accessories before first and every use.

▪ If using a device with a safety lock, such as a MicroDriver or Universal Handswitch, always place that device in the SAFE position when not in use. IMPORTANT: Be aware that the TPS footswitch will override the Universal Handswitch SAFE setting.

▪ Use of safety glasses by user and operating room staff is recommended to prevent eye injuries.

▪ Always use the appropriate accessory combination with a handpiece. Contact your Stryker sales representative for a complete list of accessories. Failure to comply may result in patient and/or operating room staff injury.

HANDPIECE SAFETY ▪ Read this booklet and the information supplied with your TPS components. Component instructions provide specific safety information. Refer to the instructions supplied with Stryker Endoscopy handpieces when using those handpieces in conjunction with the TPS console.

▪ Please note the handpiece starts with rapid acceleration when the footswitch or handswitch is activated. ▪ During initial use of your TPS handpieces, monitor the heat response in relation to the type of surgical procedure being performed. Frequently check the distal tip and body until you are familiar with its temperature rise characteristics. Failure to pay close attention to handpiece temperature may cause burn injury to patient.

▪ DO NOT attempt to change a saw, bur, or drill while handpiece is running. ▪ Stryker handpieces which fail due to long life and/or nose bearing failure may allow foreign matter to migrate or emit from the distal tip of the handpiece. Fluid may leak into the surgical site, such that measures ­may be required, per the physician's discretion, to protect the patient from infection.

▪ Operating a handpiece in the Window Jog mode may cause the handpiece to overheat. If a handpiece overheats, the console automatically turns off the handpiece. (The alarm does not sound in this event.) Carefully monitor the operating time to prevent the handpiece from overheating. Failure to comply may cause injury to the patient and/or the operating room staff.

▪ Never rest handpiece on the patient. Improper handling of a handpiece could result in damage or burns to tissue. ▪ Do not place a TPS handpiece near or on a magnetic pad or tray. The magnetic field can simulate a Universal Handswitch and may cause the handpieces to run inadvertently. ▪ DO NOT modify any bur to fit the handpieces. Use only Stryker approved burs. Other burs may not fit properly in the handpiece. During use they may come out of the handpiece or bend which would result in damage to tissue in the surgical site due to loss of control of the bur.



System Overview The Stryker Total Performance System is intended for use in the cutting, drilling, decorticating, and smoothing of bone and other bone related tissue in a variety of surgical procedures. It is also used for the placement or cutting of screws, wires, pins, and other fixation devices as it can be used to cut metal. TPS console powers multiple handpieces while allowing the user to program a number of customized settings.

Symbol Definition

Power ON TPS Handpiece

Power OFF

TPS Irrigation Console

Footswitch Connector

Stryker Endoscopy Handpiece

ENDO Endoscopy Handpiece Port TPS Handpiece with Universal Handswitch

TPS1 TPS Handpiece Port 1 Handpiece Cords

TPS2 TPS Handpiece Port 2

TPS Footswitch

Type B Applied Part

Type BF Applied Part

Connection Detail



Operating Instructions WARNINGS: ▪ Before using this system read and understand the information in this manual and the instructions supplied with each TPS component and Stryker Endoscopy handpieces. Pay close attention to the User/Patient Safety Information. ▪ Familiarization with the Total Performance System prior to use is important. If you have any questions, contact your Stryker Instruments representative or Stryker Customer Service at 1-800-253-3210. ▪ Prior to use, system components should be operated and inspected for any damage. DO NOT use if damage is apparent.

Connecting the Equipment This is a system overview. For specific instructions on each TPS component, refer to the information supplied with the component. 1. Place your console on a sturdy, flat surface near a hospital grade outlet. 2. Plug the console's power cord into the recessed power socket on the back of the console. 3. Plug the other end of the power cord into a hospital-grade wall outlet. 4. Turn on the console. The on/off switch is located on the front of the console. NOTE: As you set up the system, the console's screen will change to indicate the various components as they are plugged in. 5. If using a Footswitch, plug the footswitch cable into the console port marked FOOTSWITCH. Align orientation marks and gently push connectors together. CAUTION: All TPS Cords have push/pull connectors. Do not thread or twist for insertion or removal. 6. Plug the handpiece cord(s) into the console port(s) identified for the handpiece. Align connector orientation marks and gently push connectors together. NOTE: Ports marked TPS1 and TPS2 are for Stryker TPS handpieces only. The port marked ENDO is intended for the following list of Stryker Endoscopy handpieces: SE5 Handpiece REF 272-704-100, SE5 Hand-controlled REF 272-704; QuadraCut Shaver REF 275-701; QuadraCut Bone Plug REF 275-705; and QuadraCut small Joint REF 275601. NOTE: If using a TPS Universal Handswitch, attach it to the handpiece before you plug the cord into the handpiece. 7. Plug the other end of the handpiece cord(s) into the handpiece(s). 8. Attach cutting accessories to handpieces. Instructions supplied with each handpiece or attachment provide details for cutting accessory assembly. WARNING: Use only Stryker approved cutting accessories. 9. If using an Irrigation Console REF 5100-50, assemble Irrigation Pole REF 5100-50-28 to the console as shown. Hang irrigation bag from pole. Install irrigation cassette into the pump. Attach irrigation clips to handpieces and connect tubing. 10. Power the system and test the devices to ensure they are performing properly prior to surgery.



WARNINGS: ▪ Portable and mobile RF communications equipment can affect the TPS Console. ▪ The TPS Console should not be placed adjacent to or stacked with other equipment. If adjacent to or stacked, the equipment must be observed to verify normal operation.

The Control Screen TPS Start-Up Screen This display appears on the screen every time the console is turned on. This display remains on the screen until a cord is plugged into one of the TPS handpiece ports or the OPT button is depressed. If a handpiece cord is plugged into a handpiece port when the console is turned on, this display shows momentarily before changing to either a no handpiece detected screen or to the screen of the selected handpiece.

No Handpiece Detected Screen This image indicates that no handpiece is attached to the cord plugged into the selected port. The screen will change to the handpiece screen when the missing handpiece is connected to the cord. NOTE: This screen will also appear if the console is unable to recognize the handpiece. This could be caused by a handpiece that is not compatible with the TPS console, or a faulty or damaged handpiece or cord.

This example shows that no handpiece is attached to the cord plugged into the TPS2 port.



Functions of the Control Screen The TPS console allows the user to select functions and settings such as handpiece selection, speed, and direction. Designed to be easy to use and understand, the touch sensitive control screen allows you to set the system controls with the touch of a finger. Interactive icons on the control panel represent system components and functions. The control screen also provides important monitoring information for the selected handpiece.

Surgeon preference indicator

Handpiece identification

Attachment/ Blade identification

Handpiece power Indicator ramp

Handpiece speed

TPS handpiece select buttons Select system options screen

Endo handpiece select button

Footswitch indicator and options

Elements of the Control Screen Handpiece identification displays the name of the active handpiece. NOTE: Handpieces can be plugged into each of the console's handpiece ports, but only one can be selected at a time.

Control screen visually presents options which can be set for the selected handpiece. Icons represent elements of your TPS system. Icons are functional buttons. Each function may be selected by pressing the screen where the button is displayed. When you touch an icon, the icon appears to be pressed down and the graphic symbol highlights to indicate that it is activated. (See Icon Definition).

NOTE: When *CUSTOM* is displayed at the top of the screen, the console's default settings are selected from Surgeon Preferences. The console is able to capture the preferred settings for several different users. When this feature is activated, the preferred settings act as default settings. See Surgeon Preference for further details.

NOTE: An audible signal indicates interface with icons.

Handpiece speed information displays the default speed for each handpiece until you reset speed settings. While the handpiece is running, the display shows the actual handpiece speed. If the handpiece is not running the default or selected speed is displayed.

NOTE: Buttons such as the adjust arrows or OPT button which are temporary toggles or adjustment buttons only highlight while depressed. NOTE: Buttons with a white background are toggle buttons.

NOTE: Incremental information displayed on the control screen is accurate within +/-1%.

NOTE: Options vary among different handpieces. The console will only display the options available for a given handpiece.



Select Your System Settings

Standard Features

NOTE: When the console is turned on, its default setting is factory default unless a Surgeon Preference setting is selected as the start up default. See Surgeon Preference for further details.

Main Option Icon The option icon appears on all handpiece screens and allows access to the MAIN OPTION screen. See MAIN OPTION SCREEN for further details.

1. Handpiece select buttons enable you to activate the handpiece plugged into one of the three ports on the front of the console. To display the control screen for the handpiece plugged into the TPS1 port, touch the corresponding handpiece select icon. The icon highlights and appears pressed down. NOTE: Selecting a handpiece icon activates the corresponding handpiece and displays its specific control screen.

Footswitch Icon

2. Change the maximum handpiece speed. Press the adjustment arrows to change the handpiece speed setting incrementally until the desired speed is reached.

The footswitch icon only appears when a footswitch is plugged into the console. If using a footswitch with these graphics, pedal functions can be reprogrammed. See Footswitch Adjustments and Footswitch Button Mapping.

• Saws - The set point is displayed as a percentage of maximum power and vertical line on the speed ramp. During handpiece operation, the percentage reading and speed ramp displays the power level. • Rotary handpieces - The speed set point is displayed. During handpiece operation, the current speed is displayed.

A footswitch with these graphics cannot be reprogrammed.

3. Select various settings as desired. Refer to the control screens on the following pages for details for each handpiece.

Handpiece Irrigation

4. Select the OPT icon to access the MAIN OPTION screen. This screen allows access to general console and user settings as well as direct access to each handpiece option screen.

Irrigation functions pertain only to Irrigation Console REF 5100-50. Press the icon to start irrigation flow while the handpiece is running.

NOTE: The screen returns to the active handpiece adjustments screen when the handpiece name is touched.

If irrigation is desired while the handpiece is stopped, press and hold the icon until the pump is activated. The pump can be turned off by touching the icon again.

5. Touch the EXIT icon to return to the active handpiece control screen.

Irrigation flow rate can be adjusted from the HANDPIECE screen or the HANDPIECE ADJUSTMENTS screen. From the HANDPIECE screen, toggle the SPEED icon to WATER before using the arrows to adjust flow rate. -ORFrom the HANDPIECE ADJUSTMENTS screen, select the WATER icon and use the arrows to adjust flow rate. Flow rate diminishes as the setting approaches zero. NOTE: Flow rate may vary among handpiece models. The pump can also be turned on and off with the footswitch.

10

Quick Reference Guide Icon Definition Handpiece Select This type of icon appears when a cord (without a handpiece) is plugged into the corresponding Endo, TPS1 or TPS2 port. It appears depressed when selected. The handpiece graphic appears when a handpiece is attached to the corresponding cord. The handpiece graphic highlights and the icon appears depressed when selected.

Footswitch Icon: Appears when a footswitch is connected to the console. Also gives access to footswitch adjustments screen.

Adjustment Arrows: Use in conjunction with other options to set handpiece speed or power, braking, acceleration, irrigation flow, screen contrast etc. Increase

High: Enables handpiece to operate in a high speed mode.

Low: Enables handpiece to operate in a low speed mode.

Toggle Buttons NOTE: For easy identification, only toggle buttons have a white background. Speed: Use with the increase and decrease icons to adjust rotary handpiece speed.

Decrease

Water: Use with the increase and decrease icons to adjust irrigation flow.

System Options Options: Gives access to handpiece adjustments, system information, console adjustments and user preference. Handpiece option: Accesses corresponding handpiece adjustment screens.

Exit: Returns to previous screen.

Power: Use with the increase and decrease icons to adjust saw power. Direction Arrows: Sets handpiece mode. Forward (clockwise)

Reverse (counterclockwise)

Oscillate

Information: Displays system information screen.

Console: Gives access to console adjustment screen.

Irrigation: Activates or deactivates handpiece irrigation.

Variable: Handpiece speed responds to varying degrees of pressure on the footswitch or handswitch. Nonvariable: Handpiece operates at constant set-point speed/power level. One touch: Handpiece is activated by one touch of a trigger device and continues to run when the trigger device is released. Handpiece is deactivated by touching any trigger device. In this mode, the handpiece operates at constant set-point speed/power level.

Allows access to the surgeon preference screen. Advanced: - Accesses the advanced footswitch mapping screen. Button: Access button mapping screen.

NOTE: TPS Console REF 5100-1 does not display options related to handpiece irrigation.

11

Return to full screen: Return from Big to full handpiece screen.

Saw Handpiece Screen TPS Oscillating and Sagittal Saws POWER/WATER ADJUSTMENT The power icon functions as a toggle switch for power and water settings.

Power and irrigation adjustments are made using the adjustment arrows.

As the power setting is reduced from 100%, a vertical bar displays to correspond to the lower selected maximum power. This screen appears when a TPS saw is selected at the TPS1 port with the maximum power set at 100%.

The irrigation setting is not displayed on this screen. However, it can be seen on the Handpiece Adjustments screen.

ENDO, TPS2 and the footswitch icons indicate other instruments are plugged into the console.

METHOD OF OPERATION Saws can be operated with the TPS Universal Handswitch or TPS Footswitch. Handswitch Handpiece selection can be made by depressing the handswitch once. The handpiece select icon changes to indicate the active handpiece. Depress the handswitch again to run the handpiece. Handpiece runs from start-up to the maximum selected speed. Footswitch Handpiece runs from start-up to the maximum selected speed with either the forward or reverse pedal.

12

Rotary Handpiece Screen SPEED/WATER ADJUSTMENT The speed icon functions as a toggle switch for speed and water settings.

Speed and irrigation adjustments are made using the adjustment arrows.

DIRECTION OPTIONS FORWARD Clockwise

REVERSE Counterclockwise This screen appears when a TPS rotary handpiece is selected. The TPS Universal Drill is plugged into the TPS2 port and the speed is set at 75,000 RPM. ENDO, TPS1 and the footswitch icons indicate that other instruments are plugged into the console.

TPS Universal and Micro Drills

OSCILLATE

TPS MicroDriver and Universal Driver

METHOD OF OPERATION The Universal Drill can be operated with the TPS Universal Handswitch or TPS Footswitch.

METHOD OF OPERATION The TPS MicroDriver can be operated with its builtin trigger and rotary control switch or with the TPS Footswitch. NOTE: The handpiece will not run when the rotary switch is in the SAFE position.

Handswitch Handpiece selection can be made by depressing the handswitch once. The handpiece select icon changes to indicate the active handpiece. Depress the handswitch again to run the handpiece. Handpiece runs from start-up to the maximum selected speed. Speed and cutting direction corresponds to what is selected on the screen. Footswitch Handpiece runs from start-up to the maximum selected speed.

Trigger The built-in speed control trigger(s) runs the handpiece from start-up to the maximum selected speed. MicroDriver only: Select cutting direction with the rotary switch on the handpiece. Direction icon will highlight to match the rotary switch position. Universal Driver only: Select cutting direction by depressing either the forward trigger or the reverse trigger. Squeezing both triggers simultaneously runs the handpiece in the oscillate mode. The oscillate icon will become highlighted.

Handpiece direction is controlled by selecting the forward or reverse pedals. The direction icon on the screen changes when the corresponding footswitch pedal is depressed.

Footswitch Handpiece runs from start-up to the maximum selected speed. The direction icon on the screen changes when the corresponding footswitch pedal is depressed. Footswitch operation overrides handpiece settings. Example: If the footswitch reverse pedal is depressed while the handpiece rotary switch is set in forward, the handpiece operates in the reverse direction and the reverse icon highlights. However, after the pedal is released, the direction icon will revert to the direction set on the rotary switch.

13

The Stryker Endoscopy and Leibinger Handpiece Screen This screen displays the cutter nomenclature only if the handpiece and cutter being used contain cutter recognition capabilities. Depress the mode icon and set the maximum speed using the adjustment arrows. Speed settings are individually selected for each mode. Default speed settings and incremental steps are specific to each handpiece.

MODES Operation in high speed mode.

This screen appears when a Formula handpiece with cutter recognition is selected. The oscillate mode is selected and Set Speed is set at 1,800 RPM.

Operation in oscillate mode.

TPS1, TPS2 and the footswitch icons indicate that other instruments are plugged into the console.

Operation in low speed mode.

The Stryker Leibinger Hummer4 REF 5290-601-100 and Stryker Endoscopy Formula REF 375-701-500 provide cutter recognition capabilities.

When a cutting accessory with cutter recognition capabilities is installed, the system may override selected speed settings within each mode to more appropriate speed settings for that particular cutting accessory.

WARNING: Read and understand the Stryker Endoscopy handpiece instructions. If instructions were not supplied with your handpiece, refer to the appropriate Stryker Endoscopy Operating and Maintenance Manual listed below. Handpiece 272-704 275-701 275-705 275-601 290-601

Manual 1000-400-120 1000-400-034 1000-400-034 1000-400-034 1000-400-288

IMPORTANT INFORMATION The hand-controlled Endo Shaver can be controlled by the footswitch or by the hand-control buttons built into the handpiece. The handpieces listed here do not have cutter recognition capabilities.

14

Main Option Screen Select the OPT icon to access the MAIN OPTION screen. This screen allows direct access to the handpieces attached to the console, console and user settings, and system information.

OPTION 1, 2, and E icons appear only when handpieces are plugged into the corresponding console ports. A handpiece must be plugged in to program its settings.

To go to the HANDPIECE ADJUSTMENT screen, touch the option button that corresponds to the desired handpiece. Refer to HANDPIECE ADJUSTMENT.

The MAIN OPTION screen also gives DIRECT access to: Refer to SURGEON PREFERENCE.

Refer to CONSOLE ADJUSTMENT.

Refer to SYSTEM INFORMATION.

EXIT: Return to handpiece screen.

15

System Information Screen Selecting the INFO icon from the MAIN OPTION menu displays the part numbers and revision levels of the configured system components. This information is used as a diagnostic aid only.

Return to the MAIN OPTION screen.

16

Handpiece Adjustment Screen

Select a Handpiece Option icon from the MAIN OPTION screen to access this screen.

ATTACHMENT: Use the arrow icon on the left to scroll through the list of attachments. Select the attachment that is assembled to the handpiece by stopping on it.

NOTE: For quick access to this screen, touch the handpiece title displayed at the top of any handpiece screen. And return to the handpiece screen by touching the handpiece title displayed on this screen.

Selecting the proper attachment will optimize the performance of the handpiece for the attachment and display the appropriate speed scale on the handpiece screen.

Depending on the type of handpiece, one or more of the following options will be available.

RUN MODE: Use the RUN MODE toggle button to scroll through the options and stop on the desired setting.

Select BRAKE, ACCEL, TURNS or WATER then press the arrow icons to change the setting.

Variable: Handpiece speed responds to the degree of pressure applied to the handswitch.

Brake: At 100%, the handpiece stops abruptly. Deceleration slows as the setting nears zero.

Nonvariable: Handpiece speed runs at the maximum setting only. Varying pressure on the handswitch does not vary the handpiece speed.

Accelerate: At 100%, handpiece speed accelerates quickly. Acceleration slows as the setting approaches zero.

One touch: Toggle the handpiece on and off with a single touch of a trigger device. The trigger device can be the handswitch or handpiece trigger buttons.

Turns: Use to set the number of turns per direction when running a handpiece in the oscillate mode. The minimum setting will set the oscillate function to operate in a TIME-BASED mode where the number of turns are based on the speed of the handpiece.

BUTTON: See Handpiece Button Mapping.

Water: At 100%, irrigation volume is greatest. Volume decreases as the setting approaches zero.

FOOTSWITCH: Activates FOOTSWITCH ADJUSTMENTS. See Footswitch Adjustments.

17

Console Adjustment Screen Select the CONSOLE ADJUSTMENTS icon from the MAIN OPTION screen to access this screen. Select CONTRAST, BRIGHTNESS or VOLUME then press the arrow icons to change the setting. Contrast: Screen contrast lightens at higher settings. The chosen setting remains until reset. Brightness: Screen brightness intensifies at higher settings. Volume: The audible signal is louder at higher settings.

Use the BIG SCREEN toggle button to select one of the following options. Automatic: A big screen is displayed while the handpiece is running and automatically returns to the full screen when handpiece stops. On: The big screen is continuously displayed. It can be temporarily switched back to the full screen by touching the Full Screen icon which appears in the lower right corner of each handpiece screen. See example of screens below. Off: The big screen option is turned off. Only a full screen is displayed.

Example of full screen.

18

Example of big screen.

Footswitch Adjustment Screen This screen appears only when using a TPS Footswitch that is Revision 3 or newer. See Standard Features. NOTE: The Footswitch revision is displayed on the SYSTEM INFORMATION screen. Access this screen by selecting the Footswitch icon on the HANDPIECE CONTROL SCREEN or HANDPIECE ADJUSTMENTS screen. NOTE: These footswitch settings function only for the handpiece for which they were selected. The handpiece is identified at the top of the screen. From this screen, the default functions of footswitch pads A and B can be reprogrammed to accommodate the surgeon's preferences. The left and right toggle icons correspond respectively to footswitch pads A and B. Press each icon to scroll through the following function options and stop on the desired setting. Off: Pedal is turned off. Default: Footswitch defaults to the settings selected on the handpiece screen. Forward: Pedal setting default is overridden. Pedal will provide handpiece rotation in the forward (clockwise) direction. Reverse: Pedal setting default is overridden. Pedal will provide handpiece rotation in the reverse (counterclockwise) direction.

Advanced: Use to access the Footswitch Button Mapping screen. It will allow you to reprogram all the footswitch pedals.

Return: Return to the previous screen.

19

Footswitch Button Mapping Screen Access this screen by selecting the ADVANCED icon on the FOOTSWITCH ADJUSTMENTS screen. The default functions of each footswitch pedal and button can be reprogrammed to accommodate the surgeon's preferences. Depending on the type of handpiece displayed at the top of the screen, one or more of the following options will be available on this screen. The DIRECTION, OP MODE, and RUN MODE icons correspond respectively to the two largest footswitch pedals. Press each icon to scroll through the following function options. And stop on the desired function setting. DIRECTION Pedal is turned off. Footswitch defaults to the settings selected on the handpiece screen.

BUTTON FUNCTION The I, II, and III icons correspond to the three small pads across the top of the footswitch.

Forward: Pedal setting default is overridden. Pedal will provide handpiece rotation in the forward (clockwise) direction.

Button Function displays the active function of the corresponding button.

Reverse: Pedal setting default is overridden. Pedal will provide handpiece rotation in the reverse (counterclockwise) direction.

Use the arrow icons to scroll through the functions and stop on the desired setting.

OP MODE Footswitch defaults to the settings selected on the handpiece screen.

See Button Functions listed on next page.

Handpiece operates in the high speed range. Handpiece operates in the low speed range. Handpiece operates in oscillate mode.

Reset all: Press to return all pedals and buttons back to their default setting.

RUN MODE Footswitch defaults to the settings selected on the handpiece adjust screen.

Reset: Press to return the selected footswitch button back to its default setting.

Variable: Variable speed control. Speed responds to varying degrees of pressure on the footswitch. Nonvariable: Handpiece operates at a constant speed level determined by the maximum speed selected from the handpiece screen. One touch: The one touch function is similar to an on/off toggle. Tap the footswitch to operate the handpiece at the maximum speed selected from the handpiece screen. Tap any trigger device again to stop operation.

20