COMPACT AIR DRIVE II Maintenance and Cleaning Chart

SET CONTENTS

ComPact Air Drive II 60.550.030 Graphic Case Base Assembly for CAD II 60.550.031

Lid for CAD II Graphic Case

60.550.032

Attachment Rack for CAD II Graphic Case

60.550.033

Insert Tray for CAD II Graphic Case

2500

ComPact Air Drive II Binder

511.701

ComPact Air Drive II

511.73

Jacobs Chuck with Key

511.75

Quick Coupling for drill bits

511.761

Large Quick Coupling

511.785

Reduction Drive Unit

511.791

Quick Coupling for Kirschner wires

519.40

Cleaning Brush

COMPACT AIR DRIVE II Maintenance and cleaning instructions for power equipment

519.51S Double Air Hose-3 meters with Schrader Stem 519.97

Autoclavable Oil

Also Available 690.577.06 Grommets for CAD II Attachment Rack 511.20

Oscillating Drill Attachment

511.30

Radiolucent Drive

Limited Warranty and Disclaimer: DePuy Synthes Companies products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.

511.731

Keyless Jacobs Chuck

Please also refer to the package insert(s) or other labeling associated with the devices identified in this care and maintenance chart.

511.782

Hudson Adaptor

CAUTION: USA Law restricts these devices to sale by or on the order of a physician.

511.783

Modified Trinkle Adaptor

511.784

Trinkle Adaptor

Some devices listed in this care and maintenance chart may not have been licensed in accordance with Canadian law and may not be for sale in Canada. Please contact your sales consultant for items approved for sale in Canada.

511.786

Reduction Drive Unit with Reverse

511.80

Oscillating Saw Attachment

511.801

Oscillating Saw Attachment II

511.902

Reciprocating Saw Attachment

511.904

Sternum Top for 511.902

Not all products are currently commercially available in all markets.

Double Air Hoses, with Synthes stem 519.50

2 mm

519.51

3 mm

519.53

5 mm

Manufactured or distributed by: Synthes USA Products, LLC 1302 Wrights Lane East West Chester, PA 19380

Double Air Hoses, with Schrader stem 519.50S

2 mm

519.53S

5 mm

To Order (USA): (800) 327-6887 To Order (Canada): (855) 946-8999. Note: For recognized manufacturer, refer to the product label.

519.98 Spare Container with Autoclavable Oil

www.depuysynthes.com

CARE AND MAINTENANCE CHART

© DePuy Synthes 2016. All rights reserved. DSUS/PWT/0414/0017(1) 7/16

AIR POWERED EQUIPMENT GENERAL MAINTENANCE ComPact Air Drive II (511.701)

Attachment release button Reverse trigger (both triggers) Variable speed trigger

Air control valve

Before cleaning, remove all instruments, attachments, and the hose from the air drive unit.

Clean and lubricate drive unit, attachments, and air hose by hand immediately after each use.

Do not immerse in water.

Air inlet

Do not clean in automatic washer or ultrasonic cleaner. Use a neutral pH cleaning solution.

CLEANING Before cleaning, turn air control valve to the “off” position. Manipulate moving parts under running water to loosen and remove debris. Open and close chucks, and move quick couplings back and forth.

1

2

3

4

Manually clean air drive and attachments under running water. Use a mild cleaning solution (neutral pH) and a soft brush.

Clean cannulations of the air drive and attachments with the cleaning brush. Do not insert cleaning brush into the air inlet.

Retract and clean the quick coupling hose end with a soft brush and mild cleaning solution.

Clean hose with a mild cleaning solution and a soft brush or cloth.

Do not allow water to enter the air inlet of the drive unit.

The Quick Coupling for K-wires (511.791) must be fully open to its maximum diameter of 3.2 mm before inserting the brush.

Do not allow water to enter the air inlets.

Keep hose ends out of water. Dry all instrumentation with a soft cloth.

LUBRICATING Lubricate the ComPact Air Drive II after every cleaning and before sterilization.

Important: Never lubricate the radiolucent drive.

Use Synthes Autoclavable Oil (519.97).

1

2

3

4

Before lubrication, open air control valve. Apply approximately five drops of oil into the air intake of the drive unit. Lubricate triggers.

Connect the air drive to an air hose. Run the air drive for 20 seconds in both directions.

Lubricate all moving parts of the attachments with one or two drops of oil. Operate the parts to distribute the oil. Wipe off excess oil.

Lubricate the quick coupling hose end with one or two drops of oil.

Forward (lower trigger)

Reverse (both triggers)

SET CONTENTS

ComPact Air Drive II 60.550.030 Graphic Case Base Assembly for CAD II 60.550.031

Lid for CAD II Graphic Case

60.550.032

Attachment Rack for CAD II Graphic Case

60.550.033

Insert Tray for CAD II Graphic Case

2500

ComPact Air Drive II Binder

511.701

ComPact Air Drive II

511.73

Jacobs Chuck with Key

511.75

Quick Coupling for drill bits

511.761

Large Quick Coupling

511.785

Reduction Drive Unit

511.791

Quick Coupling for Kirschner wires

519.40

Cleaning Brush

COMPACT AIR DRIVE II Maintenance and cleaning instructions for power equipment

519.51S Double Air Hose-3 meters with Schrader Stem 519.97

Autoclavable Oil

Also Available 690.577.06 Grommets for CAD II Attachment Rack 511.20

Oscillating Drill Attachment

511.30

Radiolucent Drive

Limited Warranty and Disclaimer: DePuy Synthes Companies products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.

511.731

Keyless Jacobs Chuck

Please also refer to the package insert(s) or other labeling associated with the devices identified in this care and maintenance chart.

511.782

Hudson Adaptor

CAUTION: USA Law restricts these devices to sale by or on the order of a physician.

511.783

Modified Trinkle Adaptor

511.784

Trinkle Adaptor

Some devices listed in this care and maintenance chart may not have been licensed in accordance with Canadian law and may not be for sale in Canada. Please contact your sales consultant for items approved for sale in Canada.

511.786

Reduction Drive Unit with Reverse

511.80

Oscillating Saw Attachment

511.801

Oscillating Saw Attachment II

511.902

Reciprocating Saw Attachment

511.904

Sternum Top for 511.902

Not all products are currently commercially available in all markets.

Double Air Hoses, with Synthes stem 519.50

2 mm

519.51

3 mm

519.53

5 mm

Manufactured or distributed by: Synthes USA Products, LLC 1302 Wrights Lane East West Chester, PA 19380

Double Air Hoses, with Schrader stem 519.50S

2 mm

519.53S

5 mm

To Order (USA): (800) 327-6887 To Order (Canada): (855) 946-8999. Note: For recognized manufacturer, refer to the product label.

519.98 Spare Container with Autoclavable Oil

www.depuysynthes.com

CARE AND MAINTENANCE CHART

© DePuy Synthes 2016. All rights reserved. DSUS/PWT/0414/0017(1) 7/16