perfect TENS Instructions for Use Rev 3.2 July 2017

Dear Customer, Thank you for choosing perfect TENS. TensCare stands for high-quality, thoroughly tested products for the applications in the areas of gentle electrotherapy, muscle toning, continence management and pain relief during labour. Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain. Best regards, Your TensCare Team

2

Contents 1. INTRODUCTION ... 5 2. INTENDED USE ... 5 3. PERFECT TENS FEATURES ... 5 4. HOW “TENS” WORKS ... 6 5. CONTRAINDICATIONS, WARNINGS & CAUTIONS ... 7 6. INFORMATION ABOUT THE PROGRAMME SETTINGS ... 9 7. PROGRAMMES ... 11 7.1. PRESET PROGRAMMES ... 11 7.2. MANUAL PROGRAMME ... 12 7.3. PROGRAMME USAGE... 13 8. ELECTRODE PADS ... 13 8.1. PAD POSITIONING ... 13 8.2. PAD ADVICE ... 13 9. CONTENT ... 14 10.

UNIT INFORMATION ... 15

10.1.

CONTROLS & DISPLAY ... 15

10.2.

OPERATING INSTRUCTIONS ... 16

11.

SETTING UP AND USING THE PERFECT TENS... 18

11.1.

INSTALLATION OF BATTERIES... 18

11.2.

CONNECTING LEAD WIRES... 19

11.3.

PREPARING FOR SESSION ... 19

11.4.

TREATMENT SESSION ... 19

11.5.

AFTER YOUR TREATMENT SESSION ... 20

12.

CLEANING & STORAGE ... 20

13.

EMC ... 20

14. DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC PRODUCTS (WEEE) ... 20 15.

ACCESSORIES ... 21

16.

WARRANTY ... 21

17.

TROUBLESHOOTING ... 23

18.

GENERAL SPECIFICATION ... 24

3

SYMBOLS USED Attention! Please follow the instructions in the user’s instructions for use.

TYPE BF EQUIPMENT: Equipment providing a degree of protection against electric shock, with isolated applied part. Indicates that this device has conductive contact with the end user. This symbol on the unit means “Refer to instructions for use”.

Temperature Limitation: indicates the temperature limits to which the medical device can be safely exposed. LOT

Lot Number: indicates the manufacturer’s batch code so that the batch or lot can be identified. Humidity Limitation: indicates the humidity limits to which the medical device can be safely exposed.

S/N

Serial Number: indicates the manufacturer’s serial number so that a specific medical device can be identified. Do not dispose in household waste.

REF

Catalogue Number: indicates the manufacturer’s catalogue number so that the device can be identified. Atmospheric Pressure: indicates the atmospheric limits to which the medical device can be safely exposed. Date of Manufacture: indicates the date which the medical device was manufactured. This is included within the serial number found on the device (usually in the battery compartment), either as “E/Year/Number” (YY/123456) or “E/Month/Year/Number” (MM/YY/123456). This medical device is indicated for home use.

IP22

This medical device is not water resistant and should be protected from liquids. The first number 2: Protected against access to hazardous parts with a finger, and the jointed test finger of 12 mm ø, 80 mm length, shall have adequate clearance from hazardous parts, and protected against solid foreign objects of 12.5 mm ø and greater. The second number 2: Protected against vertically falling water drops when enclosure is tilted up to 15˚. Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angle up to 15˚ on either side of the vertical.

4

1. INTRODUCTION

3. PERFECT FEATURES

Device Description & Principles of Design

• Dual Channel

The perfect TENS unit is specifically designed to provide safe and effective pain relief in the comfort of your own home. It can help manage the pain from a wide range of conditions.

TENS

Two independent channels with four electrode pads to treat two areas at the same time. • Comfortable Stimulation Gentle TENS stimulation with 60 small steps of intensity (1 mA per step).

TENS machines can be used alone for pain relief or be combined with other treatments.

• 8 Preset Programmes Including Burst, Constant and Modulation (frequency and strength) modes and a HAN Stimulation programme.

2. INTENDED USE

• 1 Manual Programme

Perfect TENS is a medical device designed to be used in the home healthcare environment to treat muscular, joint or nerve pain using gentle electrical stimulation (i.e. transcutaneous electrical nerve stimulation (TENS)) and is suitable for use by all who can control the device and understand the instructions.

Additional programme that allows for all the parameters to be manually adjusted and saved to suit personal needs. • Memory Features 3 functions: programme retention (automatically starts in the last programme used), number of uses and time of usage.

Do not use the device for any purpose other than this intended use.

• Open Circuit Detection Automatically resets the strength to zero if the electrode pads are not correctly applied.

Warning: Not suitable for use in children without medical supervision.

• Automatic Keypad Lock Automatic keypad locking prevents any accidental changes in settings. • Detachable Belt Clip Enables the user to clip the unit onto a belt. • Large LCD Screen Clearly shows the operation of the unit and the programme and intensity being used. 5

Note: The electrode pads need to be applied directly to the skin before the intensity increase buttons will operate. If the perfect TENS detects the unit is not properly connected to you (for example if the electrode pads or leads come loose) then the unit switches the intensity to zero. This safety feature prevents any unpleasant changes in output.

Evidence suggests that TENS produce pain relief in a similar way to ‘rubbing the pain better’. The pain gate can be closed by activation of mechanoreceptors through ‘rubbing the skin’.

4. HOW “TENS” WORKS

Endorphin Release

Scientifically, the pain gate works by release of chemical in the synapse at spinal level that inhibits transmission of pain signal.

At low frequency settings, and slightly stronger outputs, TENS drives the motor nerves to produce a small repetitive muscle contraction. This is seen by the brain as exercise, and this promotes the release of endorphins - your body’s own natural pain killer. The relief builds up and normally takes about 40 minutes to reach a maximum level which can last for hours after the machine is switched off.

T.E.N.S. stands for Transcutaneous Electrical Nerve Stimulation. T.E.N.S. stimulates your body’s own natural defences against pain, namely the release of endorphins. TENS is totally safe and has been used successfully by thousands of pain sufferers.

TENS sends a gentle stimulation through the skin which works in TWO ways: Pain Gate It stimulates the sensory nerves, which carry touch and temperature signals. These nerves go to the same connections in the spine as the nerves carrying pain. A strong sensory signal will block the pain signal travelling up the spine to the brain. This is known as closing the “Pain Gate” and takes effect quite quickly after the unit is switched on. When the gate is open, pain messages get through to the brain and we feel pain. When the gate is closed, these pain messages are blocked and we do not feel pain.

By using TENS, you can expect to achieve a significant reduction in pain if not complete relief from pain. • TENS is effective for pain from a very wide range of causes. • TENS machines can be used to help reduce pain from problems in muscles, joints and nerves. • It can be also used for people with musculoskeletal pain such as longterm (chronic) back pain or knee joint arthritis. They are also often used for pain relief in the early stages of labour (see perfect mamaTENS), particularly whilst a pregnant woman remains at home and also for menstrual pain (See Ova+). 6

5. CONTRAINDICATIONS, WARNINGS & CAUTIONS

• You can use low frequency (<10 Hz) programmes on acupuncture points, to achieve similar effects to acupuncture.

In this manual:

• With neurogenic pain (caused by inflamed nerves). We recommend that you only use TENS for these conditions under medical supervision.

A Warning is used when failure to follow the instructions may result in serious injury or death. A Caution is used when failure to follow the instructions may result in a minor or moderate injury, or damage to the device or other property.

• You can safely use TENS as long as it gives you pain relief. The effect may wear off after a few hours (this is called “accommodation”). If this happens, take a break of an hour or so before trying again. If you use settings that cause muscle movement for more than 40 minutes, you may experience aching muscles a few hours later.

Notes are used to provide clarification or recommendation.

CONTRAINDICATIONS: • Do NOT use if you have a pacemaker (or if you have a heart rhythm problem) or with any electronic medical devices. Using this unit with electronic medical devices may cause erroneous operation of the device. Stimulation in the direct vicinity of an implanted device may affect some models. Stimulation on the front of the neck can affect your heart rate. Very strong stimulation across the chest may cause an extra heartbeat. • Do NOT use if you are or may be pregnant. It is not known whether TENS may affect foetal development.

7

WARNINGS:

surgery/ microwave cookers/ mobile phones) may affect the correct operation of this unit. If it appears to behave unusually, move it away from these devices.

Do NOT use when driving, operating machinery, or similar actions needing muscular control. Loose electrode pads, damaged leads, or sudden changes in contact may cause brief involuntary muscle movements.

Caution Do not permit use by children unable to understand the instructions or persons with cognitive disabilities, i.e.; Alzheimer’s disease or dementia.

Do NOT use to mask or relieve undiagnosed pain. This may delay diagnosis of a progressive condition.

Caution Keep away from children under 5 years of age. Long cord - risk of strangulation in infants.

Do NOT use if you have, in the area being treated: active or suspected cancer or undiagnosed pain with a history of cancer. Stimulation directly through a confirmed or suspected malignancy should be avoided as it may stimulate growth and promote spread of cancer cells.

Caution should be observed when using the perfect TENS at high strength settings. Prolonged use at high settings may cause muscle injury or tissue inflammation. The perfect TENS is capable of delivering outputs in excess of 10 mA (RMS) or 10 V averaged over any period of 1 sec.

CAUTIONS: Caution should be used if you have suspected or diagnosed epilepsy as electrical stimulation may affect seizure threshold.

DO NOT PLACE ELECTRODE PADS: • On skin, which does not have normal sensation. If the skin is numb too great a strength may be used, which could result in skin inflammation. • On broken skin. The electrode pads could encourage infection. • On the front of the neck. This could cause the airway to close, giving breathing problems. May cause sudden drop in blood pressure (vasovagal response). • Over the eyes. May affect eyesight or cause headaches. • Across the front of the head. Effect on patients who have had strokes or seizures is not known. May affect your sense of balance. The effects of stimulation on the brain are unknown.

Caution should be observed when using the device at the same time as being connected to monitoring equipment with body worn electrode pads. It may interfere with the signals being monitored. Caution should be used following recent surgical procedures. Stimulation may disrupt the healing process. Caution Simultaneous connection to high frequency surgical equipment may result in burns and damage to the stimulator. Caution Strong electromagnetic fields (electro8

Caution: Temperature & Relative Humidity of storage: 20°C–+40°C, 8%--70% R.H. Temperature & Relative Humidity of transportation: -20°C–+40°C, 8%--70% R.H.

ELECTRODE PADS CAUTION: Caution: Do not ignore any allergic reaction to the electrode pads: If a skin irritation develops, stop using TENS, as this type of electrodes may not be suitable for you. Alternative electrode pads specially made for sensitive skin are available (see E-696SS).

Caution: Do not attempt to open or modify the TENS unit. This may affect the safe operation of the unit and will invalidate the warranty.

Caution: Do not use this device with leads or electrode pads other than those recommended by the manufacturer. Performance may vary from specification. Electrodes with smaller surface area may cause tissue irritation.

Note: There are no known side effect to TENS use and longterm TENS use is not harmful.

6. INFORMATION ABOUT THE PROGRAMME SETTINGS

Note: Electrode pads supplied have no measurable latex content.

Each programme has its own combination of Frequency and Pulse Width settings which allow for different sensations through the electrode pads and suppress pain in different ways.

TO KEEP YOUR DEVICE IN GOOD WORKING ORDER, OBSERVE THE FOLLOWING ADDITIONAL CAUTIONS:

• Frequency (measured in Hz pulses per second)

Caution: Do not immerse your device in water or place it close to excessive heat such as a fireplace or radiant heater or sources of high humidity such as a nebulizer or kettle as this may cause it to cease to operate correctly.

PAIN GATE: A high frequency of 110 Hz is good at blocking pain signals. ENDORPHINE RELEASE: A low frequency of 4 or 10 Hz allows for the release of endorphins, the body’s natural morphine-like substances.

Caution: Keep the device away from sunlight, as longterm exposure to sunlight may affect the rubber causing it to become less elastic and crack.

• Pulse Width (measured in μs millionths of a second) The perfect TENS unit has pulse widths of 50 to 250 μs. Generally speaking, the higher the pulse width, the more "aggressive" the stimulation feels, and eventually, if the pulse width is set high enough, it will usually elicit a muscle contraction, which is typically

Caution: Keep the device away from lint and dust, as long-term exposure to lint or dust may affect the sockets or cause the battery connector to develop a bad contact. 9

• HAN Stimulation

not the desired result with a TENS unit. However, if the pulse width is too low, the patient may not perceive the stimulation. Pulse Rate is important because different frequency settings target different nerve groups and the setting will determine if the "Gate Theory" or "Endorphin Theory" of TENS will be used.

Invented by Professor Han, it is an alternating mode or shifting between high and low frequencies; stimulation works at a high frequency and a relatively low pulse width; and a low frequency and a relatively high pulse width. This is thought to produce a better analgesic effect and could be used to relieve both acute and chronic pain.

• Constant and Burst Modes Constant mode is when the sensation is continuous versus Burst mode when the sensation, as its name implies, is one of on and off. Constant mode is often used for acute pain via Pain Gate Effect whereas Burst mode is useful in chronic pain relief. Burst gives a combination of Pain Gate and Endorphin Release, but the squeezing feeling may not be as comfortable. The sensation in Burst is more of a ‘grabbing’, ‘clawing’ type and usually more by way of muscle twitching than with the high or low frequency modes. The stimulation intensity will need to be relatively high. In Constant mode, the sensation is continuous and is more of a tingling pins and needles type.

Pr

Output

Frequency Hz

Pulse Width μs

A

Constant

110

50

B

Constant

4

200

C

Burst

100 in 2Hz burst

200

D

Constant

10

200

E

Constant

110

200

F

Strength Modulated

110

200

G

Frequency Modulated

2-110 in 7 steps

200

H

HAN Alternating

100/2

100/200

• Modulation Modes Modulation is when either the frequency or pulse width sweep across range of settings. In modulation mode, the machine delivers a less regular pattern of TENS stimulation in an attempt to reduce or minimise the accommodation effects of regular, patterned stimulation. This is potentially most useful for patients who use TENS for several hours a day, if for no other reason than accommodation occurs at a slower rate and therefore less intensity adjustment may be required. See programmes F and G.

* F - The user increases the strength to the desired level in the first 7 seconds. The strength drops down 90% over a period of 6 seconds and then gradually starts increasing again to the original setting over a period of 6 seconds. * G - The frequency starts at 2 Hz and after every 3 minutes’ shifts to the next frequency setting. After 21 minutes, it returns back to 2 Hz and starts the cycle over again. Note: Specifications are nominal and subject to variation from the listed values.

10

Programme B:

7. PROGRAMMES

E - This low frequency is also known as Acupuncture-Like. Use on acupuncture points. Pulsing or tapping sensation associated with muscle contractions. It is suitable to be used for chronic pains such as back pain & arthritis, but not for injured muscles.

7.1. PRESET PROGRAMMES

There is not one programme for a particular condition, and the best choice varies from one person to another, even if they have the same type of pain.

Programme C: P + E – This programme combines P and E, and is thought to be the most effective for radiating pain in arms and legs and deep muscular pain

Each user needs to select both the programme and the positioning of the electrode pads that is best for them. You may need to try a few positions/programmes before finding the one that suits you.

This programme uses high frequency in low frequency bursts. Some people find the changes in stimulation uncomfortable.

If you are using TENS for the first time, it is recommended that you start with programme A, which gives the gentlest stimulation.

Programme D:

The perfect TENS has 8 preset pain relief programmes.

E - This programme provides soothing/relaxing effects. See the instructions enclosed with the electrode pads.

P=Pain Gate. Gives relief when being used. Wears off after a few hours.

Programme E:

E= Endorphin Release. Builds up over 40 mins. Lasts several hours after use.

P - Stronger, more penetrating version of programme A and a stronger feel. Could be used everywhere except very sensitive areas.

Programme A: P - This is the gentlest programme. It is advisable to use for your first trial of TENS while you get used to the feeling which offers tingling/pins and needles sensation. Reduced pulse width is ideal for treating nerve rich areas).

Programme F: P - This programme continuously modulates the pulse width and gives a pleasant slow relaxing massage

11

best response by choosing the frequency that suits your nervous system the best. They suggest that you start at 80 Hz or 110 Hz, then try changing frequency until you find one that gives you better pain relief.

sensation. The continuous change helps prevent accommodation occurring.

Programme G: P - This programme constantly varies the sensation, and is ideal for treating chronic pain over long period (example 5+ hours). Pain in the neck, shoulder, Elbow, back, hip or knee.

a. Press the P key until you reach programme M. b. Press the T key. The Hz symbol will flash next to the number at the bottom centre of the screen. CH1

Programme H: P + E – This programme alternates between low and high frequency every 3 seconds and gives 3 seconds of tapping, followed by 3 seconds of tingling sensation. The effective pain relief is provided by a combination of P and E. Some people find the changes in stimulation uncomfortable.

CH2

Hz

c. Press CH1+ or CH1- to adjust the setting. You can select a frequency from 2 to 150 Hz. d. Press the T key again to save your change and advance to the next setting µs. You can select a pulse width from 50 to 250 µs.

7.2. MANUAL PROGRAMME Manual Programme M: Surprisingly little research has been done on the importance of frequency.

e. Press the T key to select C or B. C = Constant B = Burst

Professor Han did research that showed that P increased as the frequency increased – but only tested up to 100 Hz.

f. Finally, you can select the Treatment Timer. Continuous, 10, 20, 30, 40 or 60 minutes. g. Press T once more to return to start using.

And that E decreases as the frequency increases.

See section 6 for more information on the choice of settings.

So, E is less effective when the frequency is >10 Hz and P is less effective when the frequency is <80 Hz. Most clinical research on P has been done at 80 Hz or 100 Hz. Many professional users believe that the response to TENS varies between individuals, and that you can get the

12

• If the pain is in, or close to, your spine you can place one pad either side of the spine. • You may feel more sensation in one pad than the other. This is normal – it depends on where the electrode pads are in relation to your nerves.

7.3. PROGRAMME USAGE TENS can be used for as long as it is necessary. Continuous treatment is fine, but the electrode pads should be repositioned regularly (at least every 12 hours) to allow the skin to be exposed to the air. The Endorphin Release programmes work better when the strength is high enough to cause small muscle contractions. Best results are achieved with a session duration between 20 and 40 minutes. Longer use may cause muscle ache.

For areas that are difficult to reach, why not ask a friend to help you attach the electrode pads?

Always check that the unit is OFF before attaching or removing electrode pads. Perfect TENS resets strength to zero if the pad or lead is disconnected from your body. This is to prevent sudden changes in sensation when the pad is re-connected.

8. ELECTRODE PADS 8.1. PAD POSITIONING The electrode pads must always be used in pairs (two electrode pads on each channel), so that the signal can flow in a circuit.

Note: See examples of positioning in the instructions enclosed with your electrode pads.

• TENS works one vertebra at a time. You need to stimulate the sensory nerves that enter the spine at the same level as the nerve carrying your pain. Since you don’t know exactly where your nerves are, the easiest way is to apply the electrode pads around/near the source of the pain. • TENS activates the nerves best if it travels along the nerve rather than across it. So place one pad further from the spine than the source of the pain, and one closer. • The nerves wrap around the limbs and torso, so you may have to try a few positions before you get the best effect.

8.2. PAD ADVICE • The electrode pads supplied are reusable but for single patient use. • In order to obtain the best conductivity through the electrode pads always ensure that they are in good condition and tacky. • Before use make sure your skin is clean and dry. • Peel the electrode pads from their protective plastic shield by holding and lifting one corner of the pad and pulling. Do not pull on the pigtail wire of the pad. • After use always replace the electrode pads on the plastic liner 13

and replace them in the re-sealable plastic bag. • If the electrode pads dry out, then it is best to buy a replacement pack. In an emergency, it may be possible to restore some of the tackiness of the pad by adding a tiny drop of water on each pad and spreading around. If too much water is added, the electrode pad will become too soft. If that happens then it is suggested in order to try and re-establish some adhesiveness, to place them sticky side up in a refrigerator for a few hours. • In very hot weather the gel on the electrode pads may become soft. In such cases place them, still on their plastic liners and in their pouch into a fridge until they return to their normal condition. • The electrode pads provided are latex-free. • Replace the electrode pads when they lose their stickiness. Poor connection may cause discomfort and skin irritation. • Storage life of an unopened pack of electrode pads is 2 years. This may be affected by very high temperatures or very low humidity.

9. CONTENTS The pack contains: • 1 x Perfect TENS pain relief unit • 2 x Lead wires (L-CPT) • 4 x 50x50 mm electrode pads (ECM5050) • 2 x AA 1.5V alkaline batteries • 1 x Detachable belt clip • 1 x Storage pouch • 1 x Manual instruction

14

10. UNIT INFORMATION 10.1. CONTROLS & DISPLAY

ON/OFF Programme selected Channel 1 strength

Channel 2 strength

Keypad Lock

Time selected

Low Battery

Programme selector

Channel 1

Channel 2 strength UP

strength UP Channel 1 strength DOWN

Channel 2 strength DOWN

Timer and manual setting selector

Output active indicators 15

To increase strength in steps of 1 mA, press and release the top part of the two channel buttons, marked CH1+ and CH2+.

10.2. OPERATING INSTRUCTIONS ON/OFF

The strength levels are shown on the LCD.

To turn the unit ON, press the ON/OFF button on the top of the unit and hold for 3 to 5 seconds until the display shows.

The strength control buttons will not operate until the unit is properly connected to you. Perfect TENS detects a disconnection and automatically returns the strength to zero.

To turn the unit OFF, press the ON/OFF button on the top of the unit and hold for 3 to 5 seconds until the display stops The unit will turn OFF automatically: • When the Timer reaches zero, • If it is left at zero strength for more than 5 minutes.

The unit has 60 levels of strength. If you hold down the button for 3 to 5 seconds, the strength will start scrolling.

The unit will start with the programme you used last. At first use, or after changing batteries, the display shows that the unit is automatically set in Programme A at zero strength.

You may feel nothing over the first few presses. Continue pressing until the sensation is strong but comfortable. Further increases during use may be necessary if your body becomes used to the sensation.

Note: Always check unit is OFF before applying or removing electrode pads.

To decrease the strength, press and release the lower part of the buttons marked CH1- and CH2-.

The backlight will turn off 10 seconds after the last button press.

The yellow LED on the output socket indicates that there is an active output. The display will remain on for 5 seconds after the plug is removed.

On the front of the unit there are six buttons:

PROGRAMME CONTROL The button marked P is the programme control. The perfect TENS has eight different, specially developed programmes lettered A to H, plus a manual

P

STRENGTH CONTROLS The buttons marked CH1+, CH1-, CH2+, CH2- are the strength controls. The left-hand buttons CH1+

CH1-

programme M. When the unit is first switched on it automatically enters programme A.

change strength in the CH2+ left-hand lead, CH1, and the right-hand buttons change the CH2right-hand lead, CH2.

Each time you press and release the P button, the programme changes and the letter is shown on the LCD. 16

To unlock, press either CH1- or CH2keys.

Each time you change the programme, the strength level reverts back to zero. This is a safety feature to alleviate any sudden feeling of a surge, as each programme gives a different sensation.

OPEN CIRCUIT CUTOUT If the perfect TENS is not correctly connected to your body, the strength in the channel which is not properly connected will automatically reset to zero. This is to prevent sudden changes if a broken connection is re-made.

TREATMENT TIMER The button marked T can be used to set the session duration and to select manual parameters for adjustment. When you switch the unit on, it is automatically set at Continuous, (displayed as C) in all programmes but B, C & H, which means that the unit will continue functioning until you switch it off.

T

MEMORY The perfect TENS has a Memory with three functions: 1) Programme Retention. When you switch the unit on, it will automatically start in the programme which was being used when it was switched off.

When you press the T button, the clock symbol will flash. You can set session times of 10, 20, 30, 40 or 60 minutes with the CH1+ and CH1- buttons.

2) Usage. Press T and CH2- together and hold down for 3 to 5 seconds. The display will show the number of times used and duration in hours used.

Press T again to save your selection.

Press the same buttons again to return to normal controls.

The LCD shows the session duration next to the clock symbol. The unit automatically counts down the minutes set and switches off when it reaches 0.

3) Memory Reset. To reset memory to zero, hold down the T and CH1- buttons together for 3 to 5 seconds.

LOW BATTERY An empty battery symbol will show when you need to change the batteries. The unit will shut down about 2 minutes after this.

Number of uses

Time used in hours

KEYPAD LOCK If you do not press any keys for 30 seconds, the keypad will lock so that only the keys marked CH1- or CH2- will work. This is to avoid accidental changes in setting.

17

Storage

11. SETTING UP AND USING THE PERFECT TENS 11.1. INSTALLATION BATTERIES

Remove batteries from your perfect TENS if the unit is unlikely to be used for a long period. Some types of batteries may leak corrosive fluid.

OF Battery Life Batteries should last about 48 hours at full power.

1) Remove belt clip by sliding down.

Unused batteries have a nominal shelf life of 3 years, but will usually last longer than this. 2) Remove battery cover by pulling on tag.

Battery Warnings Do NOT pierce, open, disassemble, or use in a humid and/or corrosive environment. Do NOT expose to temperatures over 60°C(140F).

3) Insert batteries.

Do NOT put, store or leave near sources of heat, in direct strong sunlight, in a high temperature location, in a pressurized container or in a microwave oven. Ensure that the batteries are inserted the right way as shown in battery compartment and that the ribbon is behind them.

Do NOT immerse in water or sea water, or get wet. Do NOT short-circuit. Do NOT connect the device

4) Replace battery cover and belt clip.

unless the battery cover is in place.

When the batteries are running low, a low battery indicator will show on the screen and it is important to change the batteries as soon as possible.

If battery leakage occurs and comes in contact with the skin or eyes, wash thoroughly with lots of water. Keep batteries out of the reach of small children.

Rechargeable batteries The unit will work with rechargeable batteries, but the display may appear dim. 18

Caution NEVER attempt to recharge an alkaline battery. Risk of explosion.

11.3. PREPARING SESSION

1) Before use make sure your skin is clean and dry. You can use conductivity barrier wipes for effective electrode pads contact such as TensCare Contact Skin Wipes (see E-CW50).

Caution Do not mix old, new or different types of batteries as this may lead to battery leakage or low battery indication.

2) Place the electrode pads on the skin, see section 8.

Disposal: Always dispose of batteries responsibly according to local government guidelines. Do not throw batteries onto a fire. Risk of explosion.

11.2. CONNECTING WIRES

FOR

3) You can use your TENS for several hours, you can attach the unit to your belt using the belt clip or hang it around your neck using a neck cord (not included). For safety, use thread or wool that will snap easily if the unit snags on something.

LEAD

Insert the lead wire plug into the base of the unit.

4) You can safely lean on the electrode pads. The sensation might change.

Warning: Ensure the perfect TENS is switched OFF before applying the electrode pads on the skin.

Attaching the electrode pads to the lead wire.

11.4. TREATMENT SESSION Push the pin ends firmly into the pigtail ends of the electrode pads.

1) Press and hold the ON button on the control unit for 3 to 5 seconds to switch the control unit on.

The lead wires may be damaged by rough handling, and should be treated with care.

When switched on for the first time, the perfect TENS will automatically select the programme A. Next time, it will automatically select the programme you were using the last time it was switched off.

Lead wire colour coding.

2) You can select from the 8 preset programmes or the manual programme. Details in section 7 will help you identify the best programme to suit you.

The ends of the lead wires are coloured white or red. This coding is provided for some professional uses. For most purposes, the orientation makes no difference, and you can ignore this colour coding.

3) With the required programme selected, you can adjust the intensity of 19

• Do not use any other cleaning solution than soap and water.

the stimulation with the buttons CH1-, CH1+, CH2- and CH2+ until you reach a comfortable level. The LCD display shows the strength of intensity used for each channel.

Storage life • Storage life of an unopened pack of self-adhesive electrode pads is 2 years. This may be affected by very high temperatures or very low humidity. • The unit has no fixed shelf life.

Note: If the sensation becomes uncomfortable, reduce the intensity.

11.5. AFTER YOUR TREATMENT SESSION

13. EMC

When the timer reaches 0, your treatment session is complete and the unit turns off.

Wireless communications equipment such as wireless home network devices, mobile phones, cordless telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least a distance d = 3,3 m away from the equipment.

1) Check that the control unit is OFF. If it is not, hold down the OFF button to switch off then remove the electrode pads from your skin by holding the pad itself and gently pulling. Be careful not to pull the wires as this may damage them.

(Note. As indicated in Table 6 of IEC 60601-1-2:2007 for ME EQUIPMENT, a typical cell phone with a maximum output power of 2 W yields d = 3,3 m at an IMMUNITY LEVEL of 3 V/m).

2) Replace the electrode pads to their protective plastic shield and return them to the re-sealable plastic bag.

Note: For hospital use, full EMC advice tables are available on request.

Note: When removing the electrode pads, DO NOT PULL ON LEAD WIRES.

12. CLEANING STORAGE

14. DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC PRODUCTS (WEEE)

&

Clean the case and lead wires at least once a week by wiping with a damp cloth and a solution of mild soap and water. Wipe dry. • Do not immerse machine in water.

your

One of the provisions of the European Directive 2002/96/CE is that anything electrical or electronic should not be treated as domestic waste and simply thrown away. To remind you of this Directive all affected products are now

TENS

20