Quick Guide
2 Pages
![Tripp-Lite SMX700HG Medical Grade UPS For Use with F&P Healthcare AIRVO 2™ To save battery power, ensure UPS is connected to an active (ie: switched ON) AC mains power supply prior to turning on connected AIRVO 2™ Humidifier * NB: re AIRVO 2™ - ensure user confirmation attended for yellow traffic light display on start-up if required When not in use, please store UPS connected to an active (ie: switched ON) AC mains power supply at all times regardless of UPS being turned ON or OFF &/or regardless of an AIRVO 2™ being connected to UPS POWER ON/OFF Press & hold for approx. 2 secs to activate ‘POWER’ LED Indicates UPS is switched ON. If no light at all, UPS OFF & will not supply any power Lights Solid Green UPS ON & connected to AC mains power supply Supplies AIRVO 2 with AC mains power via UPS Flashes On/Off Green + alarm (requires muting) UPS ON & disconnected from AC mains power supply Supplies AIRVO 2 with internal battery power ‘VOLTAGE CORRECTION’ LED Lights Solid Green Continuously Active whenever the UPS is automatically correcting high or low incoming AC voltage supply ‘OUTPUT LOAD LEVEL’ LED Multicoloured LED indicating approx. electrical load b Green – Light load Yellow – Medium load Red – Overload. NB: Clear the cause immediately by unplugging medical device being used with UPS ALARM MUTE Press & hold to activate ‘BATTERY WARNING’ LED Lights Red + alarm sounds intermittently after initiation of self-test Indicates UPS batteries need to be recharged or replaced (see manual) ‘BATTERY CHARGE / BATTERY POWER’ LED Multicoloured LED When UPS connected to AC mains power supply: Green – Batteries approx. fully charged Yellow – Batteries approx. midway through charging Red – Batteries beginning to charge When UPS disconnected from AC mains power supply: Green – Batteries approx. > 80% energy levels Yellow – Batteries approx. 40% - 80% energy levels Red – Batteries approx. < 40% energy levels](https://images.bioclinicalservices.com.au/3jzbxnkz0obd9i7bjilgejv55s6u/320w/TRIPP%20LITE%20-%20SMX700HG%20Medical%20Grade%20UPS%20For%20Use%20with%20F%26P%20Healthcare%20AIRVO%202.png)
Preview
Page 1
Tripp-Lite SMX700HG Medical Grade UPS For Use with F&P Healthcare AIRVO 2™
To save battery power, ensure UPS is connected to an active (ie: switched ON) AC mains power supply prior to turning on connected AIRVO 2™ Humidifier
* NB: re AIRVO 2™ - ensure user confirmation attended for yellow traffic light display on start-up if required When not in use, please store UPS connected to an active (ie: switched ON) AC mains power supply at all times regardless of UPS being turned ON or OFF &/or regardless of an AIRVO 2™ being connected to UPS
POWER ON/OFF Press & hold for approx. 2 secs to activate
‘POWER’ LED Indicates UPS is switched ON. If no light at all, UPS OFF & will not supply any power Lights Solid Green UPS ON & connected to AC mains power supply Supplies AIRVO 2 with AC mains power via UPS Flashes On/Off Green + alarm (requires muting) UPS ON & disconnected from AC mains power supply Supplies AIRVO 2 with internal battery power ‘VOLTAGE CORRECTION’ LED Lights Solid Green Continuously Active whenever the UPS is automatically correcting high or low incoming AC voltage supply
‘OUTPUT LOAD LEVEL’ LED Multicoloured LED indicating approx. electrical load b Green – Light load Yellow – Medium load Red – Overload. NB: Clear the cause immediately by unplugging medical device being used with UPS
ALARM MUTE Press & hold to activate
‘BATTERY WARNING’ LED Lights Red + alarm sounds intermittently after initiation of self-test Indicates UPS batteries need to be recharged or replaced (see manual)
‘BATTERY CHARGE / BATTERY POWER’ LED Multicoloured LED When UPS connected to AC mains power supply: Green – Batteries approx. fully charged Yellow – Batteries approx. midway through charging Red – Batteries beginning to charge When UPS disconnected from AC mains power supply: Green – Batteries approx. > 80% energy levels Yellow – Batteries approx. 40% - 80% energy levels Red – Batteries approx. < 40% energy levels
Tripp-Lite SMX700HG Medical Grade UPS For Use with F&P Healthcare AIRVO 2™ (Continued)
To Run a Self-Test (check battery condition or load) Make sure UPS plugged in and turned ON Press and hold the MUTE/TEST button for two seconds * The alarm will beep once Release the button UPS will now perform a self-test UPS operation during the self-test ‘POWER’ LED will flash ‘OUTPUT LOAD LEVEL’ and ‘BATTERY CHARGE’ UPS alarm will sound
LEDs will be lit
Note: you can leave connected equipment on during a self-test. Your UPS, however, will not perform a self-test if it is NOT TURNED ON (see ‘POWER’ Button description) CAUTION! Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections Results of a Self-Test The test will last approximately 10 seconds as the UPS switches to battery to test its load capacity and battery charge If the ‘OUTPUT LOAD LEVEL’ LED remains lit Red and the alarm continues to sound after the test, the UPS’s outlets are overloaded To clear the overload, unplug some of your equipment and run the self-test repeatedly until the ‘OUTPUT LOAD LEVEL’ LED is no longer lit red and the alarm is no longer sounding CAUTION! Any overload that is not corrected by the user immediately following a self-test may cause the UPS to shut down and cease supplying output power in the event of a blackout or severe brownout.
If the ‘BATTERY WARNING’ LED remains lit Red and the alarm continues to sound after the test, the UPS batteries need to be recharged or replaced Allow the UPS to recharge continuously for 12 hours, and repeat the self-test If the LED remains lit, contact ‘Tripp Lite’ for service & assistance via local distributor ‘NetOpt,’ QLD: P: +61 7 3801 1661 E: [email protected] or [email protected]