WelchAllyn
ThermoScan PRO 6000 Inservice Presentation
Inservice Presentation
20 Pages
Preview
Page 1
Table of Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Overview Cleaning the Probe Tip Cleaning the Body and Accessories Approved Cleaning Solutions Probe Covers Taking a Temperature Interferences Contraindications Memory and Temperature Scale Manual Timer Error Messages and Solutions Batteries Cradles and Charging Station Security Security Function Resources
Overview Displayed Temperature Range: 68–108 °F (20–42.2 °C) Age Range: Full term newborns, pediatrics, and adults Secure • Customizable security features to prevent theft, including security tether and wall mountable cradle Improved Accuracy • PerfecTemp™ technology increases accuracy of tympanic measurement compared to core temperature, especially when probe positioning is not ideal by correcting for shallow placement • ExacTemp™ light to ensure proper, steady probe positioning • Pre-heated Probe Tip for more accurate and faster readings
Cleaning the Probe Tip • Gently wipe surface of probe lens window with cotton swab or cloth slightly moistened with isopropyl or ethyl alcohol only. Use gentle pressure.
• With probe facing down, wipe the probe with a damp cloth or cleaning wipe moistened with isopropyl or ethyl alcohol. Gently wipe with dry, clean cotton swab or cloth immediately. • Allow at least 5 minutes drying time before taking temperature. Make sure probe lens window is clean and dry prior to use.
Cleaning the Body and Accessories • For additional protection, place a new probe cover on the thermometer probe to protect this area when cleaning the body of the thermometer. • Use a damp cloth or cleaning wipe with cleaning solution from the Approved Cleaning Solutions Table. To clean the body, ensure that the wipe is moist, not saturated. Wipe with display facing up. • Clean accessories using same method. Dry 5 min.
Approved Cleaning Solutions
Probe Covers Probe covers • Are intended for single use only! • Always use PRO 6000 disposable probe covers ONLY • Damaged, perforated, or soiled covers can lead to inaccurate temperatures. • The device will not take a temperature without a probe cover in place.
To install the new probe cover box into the cradle
Taking a Temperature
Proper Probe Placement Guide
Taking a Temperature
NOTE: If no action is taken the thermometer will enter SLEEP after 10 seconds or upon returning to the cradle or host device.
Interferences
For persons wearing hearing aids or in extreme ambient temperatures, remove the hearing aid or the individual from the situation and wait 20 minutes prior to taking a temperature.
Contraindications • Do not use if there is blood or drainage in the external ear canal.
• Do not use if a patient exhibits symptoms of an acute or chronic inflammatory condition of the external ear canal. • Not intended for pre-term babies or small-for-gestational age babies • Complete ear canal occlusion due to cerumen (ear wax) can result in lower temperature readings. • Use the untreated ear if prescription ear drops or other ear medications have been placed in the ear canal. • Patients who have deformities of the face and/or ear may not be able to have a temperature taken with an ear thermometer.
Memory and Temperature Scale Memory Press the MEMORY button to display last complete temperature. • The temperature will show with a MEM indicator until the MEMORY button is pushed again, a new probe cover is applied, or the thermometer enters sleep state. Memory can also be accessed from the sleep mode and will display for 5 seconds
Temperature Scale Switch to alternative temperature scale by pushing the C/F button while a reading is being displayed • Press C/F button again to revert back • Also reverts back when unit goes to sleep
Manual Timer Includes a 60 second timer that features an audible notification and visual indicator at 0, 15, 30, 45, and 60 seconds. This feature can be used to time pulse, respirations, etc.
To use: 1. Press and hold timer button for one second to activate timer (a beep is heard at initiation of timer) 2. The timer will beep at the completion of each 15 second interval. Then the current segment will become solid and the next segment will flash. 3. At 60 seconds a long beep will sound, all quadrants will appear solid, ending the timer function. 4. The thermometer will exit the timer mode after an additional 5 seconds 5. To stop the timer at any time, press the timer button
Error Messages and Solutions
Error Messages and Solutions
Batteries • Uses two (2) AA alkaline batteries • 1,000 measurements from new set
• Can use rechargeable batteries • 700 measurements per charge • Requires Charging Station (sold separately) Rechargeable battery pack
To install the AA alkaline batteries
If needed, change the C/F default setting with switch in the battery compartment using a pen or pointed object
Cradles and Charging Station Two Protective Cradles available to choose from Small Cradle
Large Cradle
Portable, holds 1 box probe covers
Wall mountable, holds 2 boxes probe covers
Optional Charging Station available separately • • • • •
For use with rechargeable batteries Fully recharges in approximately 3-4 hours from empty Fast Charge Nickel–metal hydride battery type Up to 700 measurements from a full charge Also holds a sleeve of 200 probe covers
• Cradles can be used with Charging Station • Tethers can be attached between thermometer and cradle for added security
Security Large Cradle Mounting Option • Large cradle can be temporarily or permanently screwed to a wall surface
Optional Security Tether • 1.8m (6ft) and 2.7m (9ft) security tethers screw to the cradle and thermometer • Tether also attaches to Connex Spot Monitor
Electronic Time Security (see next slide) • Select 1-12 hours operation until thermometer locks • To unlock, dock the device and cradle into any Charging Station • Requires Charging Station (or Connex Spot Monitor) and Service Tool software to activate security function
Security Function 1.
When the security function is enabled, an unlocked icon is displayed next to the battery indicator during normal use to show that the security function is active.
2.
When the device is within 60 minutes of the time limit a countdown clock showing the number of minutes remaining next to the unlocked icon. At 5 minutes prior to expiration the thermometer will begin to beep once per minute and the unlocked icon will flash
3.
Upon expiration of the time limit, the unlocked icon and countdown timer will be replaced with the locked icon and the thermometer will beep once every 5 minutes to indicate locked state. Unlock the thermometer by returning it to the charging station. NOTE: Requires Charging Station and Service Tool software Set up done by BioMedical Engineering
Resources Thank you for choosing
Customer Care: 1-800-535-6663 Website: www.welchallyn.com