Intuitive Surgical
0 Deg. 8 mm Endoscope Plus
ENDOSCOPE IDENTIFICATION Reprocessing Instructions Addendum
5 Pages
Preview
Page 1
ENDOSCOPE IDENTIFICATION Reprocessing Instructions Addendum
Cleaning, Disinfection, and Sterilization Information for Reusable Xi Endoscope Plus that is used with da Vinci X and Xi Systems The reprocessing instructions and parameters given represent the manufacturer’s recommendations according to ISO 17664. These Reprocessing Instructions are intended to be used together with the Reprocessing Instructions (PN 554151) which is provided in a separate document.
Intuitive Surgical, Inc.
1266 Kifer Road Sunnyvale, CA 94086 USA intuitive.com
PN 556753-01 Rev. A 2022.09
Intuitive Surgical SAS 11 avenue de Canteranne 33600 Pessac, France
2460
Copyright © 2022 Intuitive Surgical Operations, Inc. All rights reserved.
Trademarks Intuitive, Intuitive Surgical, and da Vinci are registered trademarks of Intuitive Surgical. Product and brand names/logos are trademarks or registered trademarks of Intuitive Surgical or their respective owner. See www.intuitive.com/trademarks.
2
Reprocessing Instructions Addendum for the da Vinci Xi Endoscope Plus
Introduction
INTRODUCTION
This addendum to the da Vinci Xi Endoscope Reprocessing Instructions, provides updated information that the number of gears on the bottom of the endoscope base may vary based on the endoscope version. For complete endoscope reprocessing instructions, see the da Vinci Xi Endoscope Reprocessing Instructions. Keep this addendum with your da Vinci Xi Endoscope Reprocessing Instructions. This addendum provides updated information for the reprocessing documents and sections listed below.
REPROCESSING INSTRUCTIONS
SECTION
da Vinci Xi Endoscope Reprocessing Instructions (554151)
Xi Endoscope Plus Overview and Endoscope Identification
Reprocessing Instructions Addendum for the da Vinci Xi Endoscope Plus
3
ENDOSCOPE
Xi Endoscope Plus Overview
The endoscope consists of the tip, shaft, base, housing, and cable, as shown in figure below. The number of gears on the bottom of the base may vary based on endoscope version.
Fiber Optic Surfaces (x2) (Light Ports)
Lens
Tip
Shaft
Indicator Windows
Bottom of Base
Base
Housing
Flush Port Release Tab
Cable
Endoscope Connector
All graphics of the Endoscope are for illustration purposes and may not be an exact representation of the product. 4
Reprocessing Instructions Addendum for the da Vinci Xi Endoscope Plus
ENDOSCOPE
Marking on Side
Endoscope Identification
Housing
da Vinci Xi Endoscope Plus
Flush Port Release Tab (White)
The number of gears may vary based on the version.
Endoscope Connector with Degree Marking Housing
Endoscope without Connector Cover
Flush Port Release Tab (Gray)
Three Gears on Bottom of Base Endoscope Connector
Endoscope with Connector Cover
Housing
Flush Port Release Tab (Gray)
Three Gears on Bottom of Base Endoscope Connector Reprocessing Instructions Manual Addendum Addendum for the for da theVinci da Vinci Xi Endoscope Xi Endoscope Plus Plus
Connector Cover and Lanyard 5