Intuitive Surgical
8 mm, Large Needle Driver
da Vinci X and Xi EndoWrist Addendum to the Reprocessing Instructions Appendices
6 Pages
Preview
Page 1
EndoWrist
Addendum to the Reprocessing Instructions Appendices Supplemental instructions for the cleaning, disinfection, and sterilization information for reusable instruments used with da Vinci Xi and da Vinci X Systems The reprocessing instructions and parameters given represent the manufacturer’s recommendations according to BS EN ISO 17664:2017. This Addendum is intended to be used together with the Reprocessing Instructions Appendices, which is provided in a separate document (554154).
Intuitive Surgical, Inc. 1266 Kifer Road Sunnyvale, CA 94086 USA
Intuitive Surgical Sàrl Chemin des Mȗriers 1 1170 Aubonne, Switzerland
www.intuitivesurgical.com Customer Service 800.876.1310
Customer Service (Europe) +800.0821.2020
PN 554341-02 Rev. A
Copyright ©2020 Intuitive Surgical, Inc. All rights reserved. Product names are trademarks or registered trademarks of their respective holders. Trademarks Intuitive Surgical, da Vinci Xi, da Vinci X and EndoWrist, SutureCut, and ProGrasp are trademarks or registered trademarks of Intuitive Surgical, Inc. Product names are trademarks or registered trademarks of their respective holders.
2
da Vinci Xi Reprocessing Instructions Appendices Addendum
Table of Contents INTRODUCTION
4
APPENDIX A
5
8 mm Instruments
5
BIBLIOGRAPHY
6
da Vinci Xi Reprocessing Instructions Appendices Addendum
3
INTRODUCTION
Introduction
This addendum is intended to be used together with the da Vinci Xi Reprocessing Instructions Appendices. The contents of this addendum are supplemental instructions. REPROCESSING INSTRUCTIONS
REPROCESSING INSTRUCTIONS PART NUMBER
da Vinci Xi Reprocessing Instructions Appendices
554154
4
da Vinci Xi Reprocessing Instructions Appendices Addendum
APPENDIX A
8 MM INSTRUMENTS
Appendix A Validated Instruments 8 mm Instruments DA VINCI XI PRODUCT CODES
PRODUCT DESCRIPTION
NUMBER OF USES
NUMBER OF REPROCESSING CYCLES
471006
8 mm, Large Needle Driver
15
20
471048
8 mm, Long Tip Forceps
18
23
471049
8 mm, Cadiere Forceps
18
23
471093
8 mm, ProGrasp Forceps
18
23
471171
8 mm, Micro Bipolar Forceps
14
19
471172
8 mm, Maryland Bipolar Forceps
14
19
471190
8 mm, Cobra Grasper
18
23
471205
8 mm, Fenestrated Bipolar Forceps
14
19
471296
8 mm, Large SutureCut Needle Driver
15
20
471309
8 mm, Mega SutureCut Needle Driver
15
20
471344
8 mm, Curved Bipolar Dissector
14
19
471400
8 mm, Long Bipolar Grasper
14
19
471405
8 mm, Force Bipolar
12
17
da Vinci Xi Reprocessing Instructions Appendices Addendum
5
BIBLIOGRAPHY
Bibliography These references were used in development of the Instructions for Use: Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices. ISO 17665-1:2006. Processing of health care products. Information to be provided by the medical device manufacturer for the processing of medical devices. BS EN ISO 17664:2017.
6
da Vinci Xi Reprocessing Instructions Appendices Addendum