Model HEM-907-E and 907-E7 Instruction Manual

Intended Use

2

Medical Purpose

This is a medical device that measures the brachial blood pressure in a non-invasive manner.

Intended User

Legally certied: such as doctor, nurse and medical expert.

Patient Population

It is used on adult patients only.

Environment

The instrument is used in physicians’ ofces, hospitals, clinics and other medical facilities.

Measurement Parameter

 Non-invasive Blood Pressure  Pulse rate

Precautions for use

Warnings and cautions described in the instruction manual should be observed.

Exemptions OMRON will not bear any responsibilities on the following matters. 1. When a problem or damage occurs caused by the maintenance and/or repair conducted by a person other than OMRON or the dealer specied by OMRON 2. The problem or damage of OMRON product caused by the product of other manufacturer not delivered by OMRON 3. The problem and damage caused by the maintenance and/or repair using the repair parts not specied by OMRON 4. The problem and damage caused by the results not observing the Notes on Safety or the operational method mentioned in this Instruction Manual 5. Under the circumstances not within the operating conditions of this unit including the power source or the setting environment mentioned in this Instruction Manual 6. The problem and damage caused by the result(s) of remodeling or improper repair of this product 7. The problem and damage caused by act of god such as re, earthquake, ood, or lightening

1. The contents of this Instruction Manual may be changed without prior notice. 2. We have thoroughly reviewed the contents of this Instruction Manual. However, if an inadequate description or error is found, please let us know. 3. It is prohibited to copy a part of or the entire Instruction Manual without getting OMRON’s permission. Unless this Instruction Manual is used by an individual (company), it cannot be used without getting OMRON’s permission from the standpoint of the Copyright Law.

3

Names and Functions of the Parts Main unit 1. LCD display

SYS

6. ON/OFF (power) Button

2. HIDE (non-display) Button mmH DIA

g

7. START Button PUL

SE

DC

mm

Hg

ON/O FF

BPM AC

8V

HID

E

P-S

3. DC jack

140 100

STA ET 180

MO DE

220

4. P-SET (pressure setting) Volume

AU

TO

AVG SINGL E .

MA 260

280

NU . CHE CK

RT

AV D E F G. L AT ION /1 s t /2n d /3rd

STO

8. DEFLATION (deation control) Button

9. Arm Cuff Connector

P

10. STOP Button 5. MODE Selector

4

Names and Functions of the Parts Ready to Measure

Display

Pulse level / Number of irregular pulse waves Number of irregular pulse waves: The pulse wave having a difference of more than ±25% from the average interval of pulse waves is determined as irregular. Number of irregular pulse waves are displayed up to three times.

SYS Systolic blood pressure

mmHg

Example of display

DIA Diastolic blood pressure

1

No. of arrhythmias 2

3

mmHg PULSE

BPM

AC

Battery level Displays

HIDE

Contents when the AVG. Mode is selected AVG. : Mean value 1st : First measurement 2nd : Second measurement 3rd : Third measurement

for the usable level.

Displays

for the low level.

Displays

for the unusable level.

Pulse rate Charging Displays when the battery pack is being charged.

External power source Displays AC when the unit is connected to the AC adapter.

5

Names and Functions of the Parts Explanation of Functions (1) Pressure setting function

P-SET

Ination can be set by AUTO (automatic setting) or the target value. AUTO (automatic setting): In the SINGLE (single measurement), AVG. (average), and MANU. (auscultation) Modes, the monitor estimates the systolic blood pressure value during ination and automatically inates to the proper value. Target value setting: The monitor inates to the target value.Pressure value is set to 30 to 40 mmHg above the expected systolic pressure.

(2) Non-display function

HIDE

A function not to display the results of measured blood pressures. However, the pressure values during the measurement are displayed.

ON/OFF

START HIDE

This function can be used when SINGLE (single measurement) or AVG. (average) Mode is selected.

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

MODE SINGLE

180

MANU. CHECK

AVG. 220

100

STOP 260 280

AUTO

(3) Manual deation control function A function to accelerate the deation speed by pushing a DEFLATION Button during deation.

ON/OFF

START

This function can be used when MANU. (auscultation) Mode is selected.

HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

6

280

Names and Functions of the Parts (4) Setting mode change function You can set the number of times to measure, the waiting time until the start of measurement, and the interval between measurements. Items to set

Set value

F1

Number of measurements

2 times, 3 times

F2

Waiting time until the start of measurement

0 sec, 3 min, 5 min, 10 min.

F3

Measurement interval time

5 sec, 30 sec, 1 min, 2 min, 3 min.

Procedure to change the set values ON/OFF

1) When the power is off, press the ON/OFF Button for more than three seconds while holding the START Button and change the mode to the Setting Change Mode.

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET

2) Press the START Button to select the item from F1 to F3.

140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

3) Press the DEFLATION Button to change the set values.

280

List of Functions for each Mode Measurement Single measureMode ment (SINGLE) Function

Average (AVG.)

Auscultation (MANU.)

Check (CHECK)

Pressure setting function Non-display function Manual deation control function Setting mode change function

7

Notes on Safety • The warning signs and the sample icons shown here are listed for you to use the product safely and correctly as well as to prevent the risk and the damage to you and others from happening.

• The icons and meanings are as follow. Warning sign

Contents

Warning

Indicates matters in which death or sever bodily damage may arise as a result of incorrect handling.

Caution

Indicates matters in which bodily harm or material damage* may arise as a result of incorrect handling.

* Material damage refers to a wide range of damage involving your house, household goods, domestic animals, and pets.

Examples of signs The icon indicates caution (including warning and danger). Matters involving actual caution are indicated by text or pictures in or near . The left icon refers to “caution for ignition”.

The icon indicates prohibitions (what you cannot do). Matters involving actual prohibitions are indicated by text or pictures in or near . The left icon refers to “prohibition to disassemble”. The icon indicates something that is compulsory (always follow). Matters involving actual compulsory actions are indicated by text or pictures in or near . The left icon refers to “pulling the power source plug”.

Warning If any abnormal matter occurs during the measurement such as ination does not stop, remove the arm cuff or pull out the air tube from the main unit. • You may suffer peripheral neuropathy. Do not wrap the arm cuff over the arm to which intravenous injection or transfusion is being conducted. • Intravenous injection or transfusion is impossible. Do not use the unit in the place where inammable gas, such as highly inammable anesthetic, may be generated or in a high pressure oxygen room or an oxygen tent. • It may cause ignition and explosion. Do not touch the AC adapter with wet hands. • You may suffer electric shock.

8

Notes on Safety Caution When you are not going to use the unit for a long period of time, be sure to remove the AC adapter from the electric outlet. • You may suffer electric shock, or electric leak or re may arise because of deteriorated insulation. Be sure to remove the AC adapter from the electric outlet when installing, removing, or cleaning the part. • You may suffer electric shock or injure yourself. Pull the AC adapter from the electric outlet when cleaning the unit. • You may suffer electric shock. In the following case, conrm the measurement with the stethoscope. (1) When an irregular pulse wave is displayed · An error may be displayed when an external vibration is applied or the patient moves his/her body.

(2) When an error is generated or the measured value is doubtful · An error may be displayed when an external vibration is applied or the patient moves his/her body. · An error may be generated in the measured value or the blood pressure may not be able to measure for the patient having peripheral circulatory disturbance or extreme hypotension. · An error may be generated in the measured value or the blood pressure may not be able to measure for the patient having short variation of blood pressure such as arrhythmia.

After cleaning the unit, dry it well, then insert the AC adapter to the electric outlet. • You may suffer electric shock. Insert the AC adapter to the electric outlet as far as it goes. Wipe off the dust on the AC adapter. • You may suffer electric shock, or there may be short circuit or re ignition. If you nd any trouble with this unit, immediately stop using it, turn off the power, pull out the AC adapter from the electric outlet, then contact the repair department. • You may suffer electric shock, or there may be short circuit or re ignition. Do not disassemble or remodel the unit. • You may suffer electric shock, or there may be short circuit or re ignition. Do not use the unit to the patient using a pump oxygenator. • The unit can not measure correctly. The unit cannot measure when it cannot detect any beat. Do not use the AC adapter and the battery pack not specied for this unit. • It may cause re or electric shock. Do not use a portable phone near the unit. • The unit may malfunction. Do not install the parts and/or instrument not specied for this unit. • It may cause damage to the unit. Do not use the damaged power cord or AC adapter, or loose electric outlet. • You may suffer electric shock, or there may be short circuit or re ignition. Do not damage the power cord of the AC adapter by placing heavy thing on it or pinching it, or modify, forcibly bend, pull, twist, or bundle it. • You may suffer electric shock or there may be electric leak and re because of deteriorated insulation.

9

Notes on Safety Caution Be sure to use the power supply of 230 VAC. • It may cause re or electric shock. Do not share an electric outlet with other unit or electric appliance. • It may cause re or electric leak. Do not pull the power cord when pulling out the AC adapter from the electric outlet. • The power cord will be disconnected or shorted and may cause re or electric shock. Do not install or store the unit where it may be sprayed with water or medication. • You may suffer electric shock. Requests from OMRON

• Do not place or put anything on the unit. • Do not apply strong shock to or drop the unit. • When you move the unit, be sure to turn off the power and remove the connected AC adapter. • When using this unit concurrently with other unit, be sure to read the Instruction Manual of the other unit to be used concurrently and understand the warnings and cautions before use.

• Be sure to conrm that all cords and tubes are connected correctly and completely before use. • Inspect the Buttons and so on to conrm that the unit operates normally before use. • When using a battery pack, be sure to conrm that the voltage is sufcient before use. If you are not going to use the unit for a long period of time, remove the battery pack.

• Do not inate the arm cuff without being wrapped over the arm. • Do not use a damaged arm cuff. • Do not use the unit in a vehicle. • Be sure to monitor all the time that the unit and the patient are not abnormal. • Please keep the unit out of the reach of patient. • Clean and store the unit and accessories after each use. • Do not clean the unit with gasoline, thinner, or high concentration alcohol. • Do not disinfect the unit by autoclave or gas sterilization (EOG, formaldehyde, or high concentration ozone.) • Do not store the unit in the following places. · Under the direct sunshine · Dusty or salty environment · Places which slope, vibrate, and/or are prone to shocks · Storage of chemicals or where gas may be generated · Under high temperature and high humidity

10

Notes on Safety Maintenance 1. Be sure to inspect the unit on regular basis. Check accuracy on a 1 year interval. 2. If the unit has not been used for a while, be sure to conrm that the unit operates normally and safely before use Durability The durability of this unit is ve years. (Arm cuff is a consumable.) Measures to take at the time of trouble or accident If a device error (Er9) occurs, take the following procedure promptly. 1. Remove the arm cuff from the patient’s arm. 2. Turn off the power and pull the AC adapter from the electric outlet. If an optional battery pack is used, remove it also. 3. Display “Trouble” on the unit so that it cannot be used. 4. Contact the dealer where you purchased the unit or the nearest OMRON dealer

11

Components of the Product Main unit

Accessories Medium size arm cuff (with built-in air bag) Model: HEM-9CMC Art.no.: 4928640-0 Applicable arm circumference: 22 to 32 cm MIN

RANGE

Instruction Manual (with guarantee card) Air tube (1 m) Art.no.: 4928647-8

MAX

EX IND

ON/O

FF

3") m(9"~1 22~32c ART.

REF

-CR19 HEM

HID E

STA RT

P-S ET

140 100

180

MO

D

220 AU TO

E AVG SINGLE . MAN

U. CHEC

260 280

AV D E F G . L AT I /1 s ON t / 2n d / 3rd

AC adapter (80230H907S) Model: HEM-9ADAP Art.no.: 1098200-0

K

STO P

Battery pack (48H907N-E) Model: HEM-9BAT Art.no.: 1098391-0

Options Large size arm cuff Model: HEM-9CLC Art.no.: 4928654-0 Applicable arm circumference: 32 to 42 cm MIN

RANGE

Medium size arm cuff Model: HEM-9CMC Art.no.: 4928640-0 Applicable arm circumference: 22 to 32 cm MIN

MAX

RANGE

Small size adult arm cuff Model: HEM-9CSC Art.no.: 4928639-7 Applicable arm circumference: 17 to 22 cm

MAX

MIN

RANGE

MAX

X INDE

INDEX

INDEX

32~42cm

) (13"~17"

22~32c

~ 9") 17~22cm(7"

13")

ART.

9

REF HEM-CL1

REF

HEM-C

REF HEM-CS19

ART.

R19

ART.

Air tube (1.3 m) Model: HEM-9T1.3 Art.no.: 4928648-6

12

m(9"~

Stand exclusive for this unit Model: HEM-9ST Art.no.: 4928649-4

Wall-hanging kit Model: HEM-9WM Art.no.: 4928650-8

Pole-mounting kit Model: HEM-9PM Art.no.: 4928651-6

How to Apply the Arm Cuff Warning

Requests from OMRON

Do not apply the arm cuff during the intravenous injection or transfusion.

• Intravenous injection or transfusion is impossible.

• Do not use the unit to the patient using a pump oxygenator.

• Do not inate the unit without applying the arm cuff. • Do not use the damaged cuff.

1. Select the arm cuff according to the arm circumference of the patient. Arm circumference Name of the arm cuff 17 - 22 cm Small size adult arm cuff (option) 22 - 32 cm Adult arm cuff 32 - 42 cm Large size adult arm cuff (option)

MIN

RANGE

MAX

X INDE

32~42cm

) (13"~17"

19

ART.

REF HEM-CL

MIN

RANGE

MAX

X INDE

~13") cm(9" 22~32 ART.

REF

-CR19 HEM

• Be sure to use the arm cuff suitable for the size of the patient’s arm. • If an arm cuff not suitable for the size of the arm is used, blood pressure

MIN

RANGE

MAX

INDEX

~ 9") 17~22cm(7"

REF HEM-CS19

ART.

may not be measured correctly. Cuff side

Air tube side

2. Securely connect the air tube. • If you connect the attached 1m air tube, the air tube can be used with the entire length of 1.2 m.

3. Prepare the patient to be ready to wrap the arm cuff. • Wrap the arm cuff over the right upper arm’s skin as a rule. • If the arm cuff is wrapped over a thick cloth or by rolling up the jacket or shirt, blood pressure may not be measured correctly. 4. Place the right hand of the patient with the palm of hand facing upward.

5. Place the arm cuff over the patient’s arm by matching the mark indicating the artery position ART. to the brachial artery.

ART.

MIN

RANGE

MAX

IND

EX

"~13") 22~32cm(9

-CR19

REF HEM

ART.

6. Wrap the arm cuff snugly using both hands and securely fasten it with the Velcro tape. At this time, the lower edge of the arm cuff must be placed 1 to 2 cm above the inner side of elbow joint. • If the arm cuff is not wrapped snugly, patient may feel numbness on his/her arm, or blood pressure may not be measured correctly. • The arm cuff wrapped diagonally along the shape of the arm does not affect the measurement value.

MIN RANGE

EX IND

1-2 cm

MIN RANGE

(9"~13") 22~32cm

-CR19

REF HEM

ART. ART.

13

How to Apply the Arm Cuff (cont.) RANGE

RANGE

INDEX

22~32cm (9"~13")

REF HEM-CR1

9

ART.

ART.

7. Adjust the level of the arm cuff to the level of the heart. • Keep the level of the arm cuff at the same level as the heart during the measurement.

How to use the Power Source (AC adapter exclusive for this unit) Warning

Connect the AC adapter to the DC jack of the main unit [1] and the electric outlet [2].

Do not use the unit in the place where inammable gas, such as highly inammable anesthetic, may be generated, or in the high pressure oxygen room or the oxygen tent. • It may cause ignition and explosion. Do not touch the AC adapter with wet hands. • You may suffer electric shock.

Caution

[2]

[1]

DC 8V

Be sure to use the power supply of 230 VAC. • It may cause re or electric shock. Do not install or store the unit where it may be sprayed with water or medication. • You may suffer electric shock.

• When using an optional battery pack, the AC adapter functions as the charger also.

Requests from OMRON

• If this unit is used concurrently with other unit, be sure to read the Instruction Manual of the other unit to be used concurrently and understand the warnings and cautions before use. • Inspect the Buttons to conrm that the unit operates normally before use.

14

How to Measure Blood Pressure Warning

Caution

If any abnormal matter occurs during the measurement such as the ination does not stop, remove the arm cuff or pull the air tube from the main unit.  You may suffer peripheral neuropathy.

In the following case, conrm the measurement with the stethoscope.

Requests from OMRON  Be sure that the patient should not touch the unit.  Be sure to monitor all the time that the unit and the

patient are not abnormal.  Do not use the unit in a vehicle.

(1) When an irregular pulse wave is displayed · An error may be displayed when an external vibration is applied or the patient moves his/her body. (2) When an error is generated or the measured value is doubtful · An error may be displayed when an external vibration is applied or the patient moves his/her body. · An error may be generated in the measured valueor the blood pressure may not be able to measure for the patient having peripheral circulatory disturbance or extreme hypotension. · An error may be generated in the measured valueor the blood pressure may not be able to measure for the patient having short variation of blood pressure such as arrhythmia.

Do not use a portable phone near the unit.  The unit may malfunction.

List of Measurement Modes To measure only once

SINGLE Mode

To measure three times (or two times) consecutively

AVG. Mode

To measure by using a stethoscope

MANU. Mode

To conrm the accuracy of pressure display

CHECK Mode

Refer to Page

16. Refer to Page

17. Refer to Page

18. Refer to Page

19.

15

How to Measure Blood Pressure (in SINGLE Mode) 1. Wrap the arm cuff over the patient’s arm.

2. Push the ON/OFF (power) Button to turn on the power.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

MODE SINGLE

180

MANU. CHECK

AVG. 220

100

STOP 260 280

AUTO

3. Set the MODE Selector to “SINGLE”.

ON/OFF

START

4. Set the P-SET (pressure setting) Volume to “AUTO” or the target ination value.

ON/OFF

START

HIDE

HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

MODE SINGLE

180

MANU. CHECK

AVG. 220

100

STOP 260 280

AUTO

5. Push the START Button to start the measurement.

ON/OFF

6. Measured results are displayed.

P-SET 140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

280

SYS

START

DIA

HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

mmHg

MODE SINGLE

180

PULSE

MANU. CHECK

AVG. 220

100

STOP 260

BPM

280

AUTO

HIDE

7. Push the ON/OFF (power) Button to turn off the power.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

16

“AUTO”, turn the Volume counterclockwise as far as it goes until you can hear the click sound. • When the systolic pressure is expected to exceed 220 mmHg, proper ination may not be possible in “AUTO” setting. Set the target ination value to 30 to 40 mmHg higher than the expected systolic pressure.

mmHg

• If the ination is determined insufcient, the unit may start ination again automatically. • If you want to stop measurement, push the STOP Button. The unit deates fast.

• When setting the P-SET to

DEF N AVG L AT I O r d . /1st / 2nd / 3

280

How to Measure Blood Pressure (in AVG. Mode) 1. Wrap the arm cuff over the patient’s arm.

2. Push the ON/OFF (power) Button to turn on the power.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

MODE SINGLE

180

MANU. CHECK

AVG. 220

100

STOP 260 280

AUTO

3. Set the MODE Selector to “AVG.”.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

MODE SINGLE

180

MANU. CHECK

AVG. 220

100

STOP 260 280

AUTO

5. Push the START Button to start the measurement. • Set the unit to the start time of the rst measurement, then the unit starts measurement automatically. • After displaying the results of rst measurement, the unit will measure blood pressure in the set number of times automatically by taking an interval. • For the setting of the number of measurements, the waiting time before start of measurement, and the interval time, refer to Page 7.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

MODE SINGLE

180

MANU. CHECK

AVG. 220

100

STOP 260 280

AUTO

7. Push the ON/OFF (power) Button to turn off the power.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140 100

MODE SINGLE

180

AVG. 220

4. Set the P-SET (pressure setting) Volume to “AUTO” or the target ination value. • When setting the P-SET to “AUTO”, turn the Volume counterclockwise as far as it goes until you can hear the click sound. • When the systolic pressure is expected to exceed 220 mmHg, proper ination may not be possible in “AUTO” setting. Set the target ination value to 30 to 40 mmHg higher than the expected systolic pressure. 6. Measured results are displayed. • After the measurement is completed, average values are displayed. • Each time a DEFLATION (deation control) Button is pushed, the measurement results for each time are displayed.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

280

SYS

mmHg DIA

mmHg PULSE

BPM

HIDE

To stop the measurement during the measurement: Push the STOP Button. To start the stopped measurement again: Push the START Button.

MANU. CHECK

STOP 260 AUTO

280

17

How to Measure Blood Pressure (in MANU. Mode) 1. Wrap the arm cuff over the patient’s arm.

2. Place the stethoscope on the patient’s arm. ON/OFF

START HIDE

D EF N AVG L AT I O r d . /1 st /2nd / 3

P-SET 140

MODE SINGLE

180

AVG. 220

100

MANU. CHECK

STOP 260 AUTO

3. Push the ON/OFF (power) Button to turn on the power.

4. Set the MODE Selector to “MANU.”.

ON/OFF

ON/OFF

START

START

HIDE

HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140

P-SET

MODE

140

SINGLE

180

MANU. CHECK

AVG. 220

100

MODE

STOP

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 280

AUTO

7. Push the ON/OFF (power) Button to turn off the power.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

18

280

AUTO

ON/OFF

140

280

MANU. CHECK

260

280

100

AVG. 220

260

5. Set the P-SET (pressure setting) Volume to “AUTO” or the target ination value. • When setting the P-SET to “AUTO”, turn the Volume counterclockwise as far as it goes until you can hear the click sound. • When the systolic pressure is expected to exceed 220 mmHg, proper ination may not be possible in “AUTO” setting. Set the target ination value to 30 to 40 mmHg higher than the expected systolic pressure.

SINGLE

180

100

STOP AUTO

280

6. Push the START Button to start the measurement. • In the “AUTO” setting, the unit stops ination at the pressure considered to be 30 to 40 mmHg above the expected systolic pressure, then start deation. • The unit can be re-inated only while the START Button is pushed. • The pressure display is synchronized with the pulse rate and renewed. • Each time the DEFLATION (deation control) Button is pushed, the unit deates by 5~10 mmHg. • When you press the STOP Button, the unit deates fast and ends the operation.

ON/OFF

START HIDE

DEF N AVG L AT I O r d . /1st / 2nd / 3

P-SET 140 100

MODE SINGLE

180

AVG. 220

MANU. CHECK

STOP 260 AUTO

280

How to Measure Blood Pressure

(in CHECK Mode)

Display of pressure can be conrmed by the CHECK Mode (yearly procedure). What you need to prepare (1) Well-adjusted reference pressure monitor (including rubber ball), (2) T-shaped tube, (3) Two rubber tubes, and (4) something in the cylindrical shape to wrap the arm cuff such as the tea container (sturdy one that will not break or deform with pressure) * Measurement error may occur even with the mercury blood pressure monitor because of insufcient amount of mercury in the mercury, dirty glass tube, or clogged glass tube cap.

How to use the blood pressure monitor 1. Connect the mercury blood pressure monitor, rubber ball, and this unit with the T-shaped tube as shown in the Figure. 2. Push the ON/OFF (power) Button to turn on the power. 3. Set the MODE Selector to “CHECK”. 4. Tightly wrap the arm cuff over a sturdy cylindrical object. 5. Close the air release valve of rubber ball and inate the monitor to a certain value (pressure to be checked).

SYS

mmHg DIA

PULS E

mmHg ON/OF

BPM

F

AC

HIDE

STAR

T

P-SE T

140

180

MOD E

100 220 AU

TO

260 280

SINGL AVG. E

MANU . CHEC K

D AV E F L G . / AT I O N 1st / 2nd / 3rd

STO P

6. Compare the value displayed on this monitor and that on the mercury. 7. Open the air release valve of rubber ball to deate.

CHECK result (1) In the measuring rule, the test tolerance of blood pressure monitor (accuracy of pressure when shipped from the factory) should not exceed 3 mmHg. (2) If the CHECK result is +/- 3 mmHg or above, contact the dealer where you purchased this unit or the nearest OMRON dealer.

19

Installation and Replacement of Battery Pack Warning Do not disassemble or modify the battery pack. Do not throw the battery pack into re or heat it. Do not charge the battery pack by using equipment other than this unit. If the uid in the battery pack gets into your eye, wash the eye with sufcient water without rubbing the eye. Then immediately consult the doctor for treatment. • You may suffer injury, or battery uid may leak, or battery may heat, ignite re, or explode.

Caution Do not short the polarities of battery using metal object such as the wire. If the uid in the battery is stained on your skin or cloth, immediately wash off the uid with water. • You may suffer injury, or battery uid may leak, or battery may heat, ignite re, or explode.

1. Remove the battery cover on the back of the main unit. 2. Installation: To install the battery pack, connect the battery pack connector to the connector in the battery cover. Replacement: Remove the battery pack from the connector and replace with a new one. 3. Install the battery cover and fasten it with screws.

Battery life

• You can use the unit for approximately three hundred measurements. mark appears frequently even after the battery is charged, replace the battery. • If a • Approximate battery life is two years. Charging time

• After inserting the AC adapter, the battery will start to charge automatically in approximately ve seconds. mark turns on. • While the battery is being charged, a • The battery can be charged in approximately twelve hours. Battery low

• Even after a • If a 20

mark starts to ash, you can use the battery for twenty to thirty measurements. However it is better to charge the battery as soon as possible. mark is displayed, the battery is low. Please charge the battery.